Category: Accessories
Price: $2147483647
Private or Vendor Listing: Private Listing
Location (State/Prov): MA
Item Condition: Used

Moving on...

I am hoping to have all the parts removed from the car over the course of the next month or so... Please bear with me throughout this process. It is not going to happen overnight. I just want to post this thread now, so I can have an idea of interest in these parts. Also, if you are interested in something that may not exactly be affordable for you at the moment, you have some time to start pinching your pennies. I will update this thread as the parts are removed. Also, I would like this process to go as quickly and smoothly as possible, so please don't be afraid to shoot me offers. I will ignore low-ball offers, but there's certainly no harm in trying...



COMPLETELY CUSTOM ONE-OFF AMUSE QUAD-TIPPED, GOLD RING EXHAUST SYSTEM

"When you're a carpenter making a beautiful chest of drawers, you're not going to use a piece of plywood on the back, even though it faces the wall and nobody will ever see it. You'll know it's there, so you're going to use a beautiful piece of wood on the back." - Steve Jobs

100% STTI Titanium. Simply stated, there is no titanium superior to the titanium that Amuse uses in their exhaust systems. Their STTI blend is unique to Amuse. It is the best. It is even superior to other quality titanium exhausts. It has only ever been used on two other exhaust systems (one for Mine's and one for the Nissan Spec-V muffler). Anyway, from start to finish, this exhaust system took over 11 months to make for me. It is the only one in the world. (It is actually the "Bill P. Version") The piping is roughly 2.5" and the four tips are slightly staggered and 4" in diameter. The mufflers are Amuse's 'A' Body and the tips are the 'B' Tails with the Gold Ring option. This exhaust has seen roughly 500 miles. Yes, 500.

I also have an Amuse R-Silent Y-pipe. I have never been a fan of loud, obnoxious exhaust systems, so I really like the resonated Y-pipe. Again, 100% titanium. This Y-pipe retails for over $2,000.

The price tag on this exhaust system was no joke. If you are simply looking for an exhaust to give you 5-10 extra horsepower and a nicer growl, then this is probably not for you. This part is not about bang-for-the-buck. This exhaust is easily the best aspect of my build. I take pride in the fact that the best exhaust manufacturer in the world built a completely custom exhaust for me. If I am not able to sell it for what I am asking, there is a good chance that I may just keep it, despite not having a car on which to put it. I am listing it with the hopes that there is someone with a G coupe who will appreciate just what kind of automotive art this is and be willing to shell out the money for it; money that is far less than I paid for it...

More on the exhaust here: JDMphasis - Project G37S: Exhausted



Y-Pipe: $1,000 + Shipping
Exhaust System: $7,500 + Shipping



ONE-OFF PROJECT MU FORGED SLIM BIG BRAKE KIT

6-Piston Front Calipers and 4-Piston Rear. 355MM Slotted Rotors.

Another custom job, the rotor hats and brackets were swapped out so this kit would work on a G37. The front pads were JUST replaced. This kit cost me more than $9,000.




Brakes: $5,400 + OEM Sport Brakes & Shipping



BRIDE XAX II SEATS w/ RAILS & SLIDERS

Red leather with gradation. These seats are very difficult to find now because they have been discontinued. The perfect blend of sport and luxury, the XAX II offers low side bolsters for ease of entry and exit. They are aggressive enough to hold you in place when taking a hard corner or driving aggressively. At the same time, the red leather offers a touch of sporty luxury. I rarely drove this car, but even when I did the seats were always covered in plastic. (You can even see it in some of pictures of the exterior of the car.) They are in excellent condition. Included are the Bride G-specific rails and sliders. I paid a little less than $3,000 for these seats and the hardware.



Seats & Hardware: $2,500 + Shipping


MATTE BLACK ADVAN RZ-DF WHEELS

20x9.0" (+27) on Falken FK452 255/35/20
20x10.5" (+25) on Falken FK452 385/30/20

These wheels are forged aluminum. They are in excellent condition. No rash or dents. They have seen less than 2,500 miles. These wheels retail for well over $1,300 each. That is not including practically brand new tires and center caps.



Wheels, Tires, & Centercaps: $4,750+ Shipping



HKS RACING SUCTION RELOADED INTAKES

These have been on the car for roughly 5,000 miles. Very nice addition to any engine bay. These intakes retail for over $900.



Intakes: $550 + Shipping

 

SOME OTHER PARTS I WILL HAVE FOR SALE:


* TEIN Flex Coilovers w/ EDFC ($2,000 + Shipping)

* Cusco Front Strut Bar w/ mounts powdercoated Wrinkle Red ($160 + Shipping)

* Cusco Front & Rear Sway Bars ($300 + Shipping)

* Zele Titanium Shift **** ($275 + Shipping)

* Top Secret Large Titanium Tow Hook ($275 + Shipping)

* Kics R40 Graphite Composite Open-Ended Lugs ($160 + Shipping)

* Kics R40 REVO Graphite Open-Ended Lugs w/ Red Caps ($210 + Shipping)

* FIC 10MM Hubcentric Spacers ($180 + Shipping)


I will have quite a few additional items that I will add to this thread over the course of the next few days and weeks, as well. If you know if an item on my car in which you may be interested, shoot me a PM and I will do my best to get back to you in a timely fashion.

Finally, I know that I have expressed my strong opinions about replica/knock-off and poor quality parts on this forum, but I have never disrespected anyone's classified thread. If you do not like my parts or my prices, that's fine, but you can keep your comments to yourself or shoot me a PM and I will be happy to engage in debate. Moderators, can I ask that, with the first "I could boost ma whip for that price" comment, you issue a warning and please delete the comment? Thank you...

 

This makes me so sad seeing this beautiful car parted out. Best of luck to you man. One of the highest quality G's out there.

 

Damnnnnnnnnnn! Going to change my pants! Thanks GLWS

 

One can only drool!

 

Can I get the cusco strut bar? Payment ready

 

oh my, if only i was in MA

 

Might be interested in your two sets of lugs. What are the condition of both, do both have locks and if I could have additional pictures? Thanks bro!

 

My favorite car on the forum

Amazing, top-notch parts. OP didn't cut any corners with this build. If you're looking for quality parts, this is the thread.

No low balling in this thread! If it doesn't sell... Hang the art on the wall!

Bill, I'll be looking for you on house hunters

 

Damnnnnnnnnnnnn

 

Sad to see you go Bill.. I would love to have the seats but my house owns me right now (modding it) lol

 

wow, now that is a list of parts!

 

another great one parting out..... Good luck with the future car.

and does the seats come with resistors? or did you run the car with the airbag lights on?
and willing to part the EDFC?

Thank you and GLWS!

 

hay dude. are the front strut bar still for sale or sold ?

 

Nothing but authentic quality parts in here. Curious to see what you pick up next. I'll be keeping an eye on this thread,GLWS Bill!