Refreshed for the New Year | From 2008 to 2013
Thank you! I am pretty much done with the G. February will be 2 years and a total of 7 years on this platform, I have one more set of wheels I will be swapping to and filming the entire build this month and then possibly selling the car. To many new amazing cars are coming out and I can't take it anymore lol. My buddy ordered his Hellcat which should be here this month or next, co-worker has the new 2015 GT 5.0 and other friend has an M4. With the new RCF,C63,Z28,Z06 and that new GT350 coming from Ford makes it hard for me to keep the G lol.
I have done all I wanted from Air to Forced Induction, BBK etc etc.
I have done all I wanted from Air to Forced Induction, BBK etc etc.
Last edited by Diego@Vossen; Dec 3, 2014 at 04:53 PM.
Thank you! I am pretty much done with the G. February will be 2 years and a total of 7 years on this platform, I have one more set of wheels I will be swapping to and filming the entire build this month and then possibly selling the car. To many new amazing cars are coming out and I can't take it anymore lol. My buddy ordered his Hellcat which should be here this month or next, co-worder has the new 2015 GT 5.0 and other friend has an M4. With the new RCF,C63,Z06 and that new GT350 coming from Ford makes it hard for me to keep the G lol.
I have done all I wanted from Air to Forced Induction, BBK etc etc.
I have done all I wanted from Air to Forced Induction, BBK etc etc.
And to sum it all up lol
- 2013 Infiniti G37 Sport Coupe 6MT Black/Black -
Performance:
-Stillen Intercooled Supercharger
-Standard 8PSI pulley
-Custom Candy Red Stillen Charge Pipe
-GTR Spark Plugs
-Frozen Boost Front Mount Heat Exchanger
-Stillen 25 Row Oil Cooler
-Full GTHAUS GTS SUS (Meisterschaft) Catback Exhaust
System with optional 130MM Tips
-Custom UPREV Tune on 93 OCT by Omar@Uprev
Current Horsepower
-500+ Flywheel (Engine HP)
-420+ WHP
Brakes:
RED Stillen/AP Racing Radi-Cal Big Brake Kit 6/4 pot J-Hook 2 Piece Rotors
-6 Piston Front (370MM)
-4 Piston Rear (360MM)
Pressure Forged
J-Hook Rotors
Front 2 Piece 370x36mm (14.5"x1.4")
Rear 2-Piece 360x28mm (14.2"x1.1")
Suspension:
- Accuair Air Suspension (E-Level)(I-Level Equipped for wireless control)(Dual 400C Compressors with EXO Mounts)(5 Gallon Tank)(Hard Lines) Air Struts Installed by Danny at Slammered Inc.
- Cusco Front Strut Tower Bar (Painted in Satin Black)
- Stillen Adjustable Front & Rear Sway Bars
- SPC Rear Camber/Toe Kit
Exterior:
-Zele Front Bumper w/Carbon Fiber Lip/Vents (Authentic)
-Infiniti IPL/Aero Side Sills
-Infiniti IPL/Aero Rear Bumper
-Infiniti OEM Midnight Style Grill
-Infiniti OEM Sport Rear Spoiler
-ZSPEED Aluminum Under Shroud
-VLEDS 5000K LEDS Everywhere (Interior,Trunk,License,Reverse Lights,Plate,Dome Lights,Doors)
-OSRAM CBI 5000K D2S HIDs
-GTR Red Start Button
-Premium Floor Mats
Current Wheels + Tires:
-Vossen Precision Series | Front 20x10 / Rear 20x11
-Pirelli P Zero 255/30/20 & 305/25/20
- 2013 Infiniti G37 Sport Coupe 6MT Black/Black -
Performance:
-Stillen Intercooled Supercharger
-Standard 8PSI pulley
-Custom Candy Red Stillen Charge Pipe
-GTR Spark Plugs
-Frozen Boost Front Mount Heat Exchanger
-Stillen 25 Row Oil Cooler
-Full GTHAUS GTS SUS (Meisterschaft) Catback Exhaust
System with optional 130MM Tips
-Custom UPREV Tune on 93 OCT by Omar@Uprev
Current Horsepower
-500+ Flywheel (Engine HP)
-420+ WHP
Brakes:
RED Stillen/AP Racing Radi-Cal Big Brake Kit 6/4 pot J-Hook 2 Piece Rotors
-6 Piston Front (370MM)
-4 Piston Rear (360MM)
Pressure Forged
J-Hook Rotors
Front 2 Piece 370x36mm (14.5"x1.4")
Rear 2-Piece 360x28mm (14.2"x1.1")
Suspension:
- Accuair Air Suspension (E-Level)(I-Level Equipped for wireless control)(Dual 400C Compressors with EXO Mounts)(5 Gallon Tank)(Hard Lines) Air Struts Installed by Danny at Slammered Inc.
- Cusco Front Strut Tower Bar (Painted in Satin Black)
- Stillen Adjustable Front & Rear Sway Bars
- SPC Rear Camber/Toe Kit
Exterior:
-Zele Front Bumper w/Carbon Fiber Lip/Vents (Authentic)
-Infiniti IPL/Aero Side Sills
-Infiniti IPL/Aero Rear Bumper
-Infiniti OEM Midnight Style Grill
-Infiniti OEM Sport Rear Spoiler
-ZSPEED Aluminum Under Shroud
-VLEDS 5000K LEDS Everywhere (Interior,Trunk,License,Reverse Lights,Plate,Dome Lights,Doors)
-OSRAM CBI 5000K D2S HIDs
-GTR Red Start Button
-Premium Floor Mats
Current Wheels + Tires:
-Vossen Precision Series | Front 20x10 / Rear 20x11
-Pirelli P Zero 255/30/20 & 305/25/20
Last edited by Diego@Vossen; Dec 10, 2014 at 11:47 AM.
Always awesome as usual - can't believe you would want to let this bad boy go....... but everyone has to move on to what they dream for next......
LMK..... I'd be very interested in following.......
Good / Best stuff always D!
LMK..... I'd be very interested in following.......
Good / Best stuff always D!
Here is the latest! VPS AKA Vossen Precision Series 1 piece Mono-Block Forged 6061-T6 aluminum alloy. My wheel order has been submitted and now phase 1 has begun. Current order will be completed by Dec 16th just in time for WEKFEST Miami Dec, 20th
Phase 1: Wheel Order / Engineering
I have already chosen the design/fitment/finish I desired. Our own in house engineering team will then submit a 3D render of the actual profile of the wheels which has already been approved by me
My Stillen / AP Racing BBK was also taken into account since the wheels will also be designed around this brake kit profile.
Front Profile 20x10
Rear Profile 20x11
Phase 2: Manufacturing
Once the above information is submitted and approved by the customer we will then begin manufacturing process right here in our own TUV approved facility in Miami, FL.
I will be updating this thread from start to finish on the VPS-309's
Phase 1: Wheel Order / Engineering
I have already chosen the design/fitment/finish I desired. Our own in house engineering team will then submit a 3D render of the actual profile of the wheels which has already been approved by me
My Stillen / AP Racing BBK was also taken into account since the wheels will also be designed around this brake kit profile.
Front Profile 20x10
Rear Profile 20x11
Phase 2: Manufacturing
Once the above information is submitted and approved by the customer we will then begin manufacturing process right here in our own TUV approved facility in Miami, FL.
I will be updating this thread from start to finish on the VPS-309's
Last edited by Diego@Vossen; Dec 11, 2014 at 11:30 AM.
