Looks pretty dam good !!! Dam X that's sexy right there , I really wanted the CV1 in matt silver!!! That's def the way to go on a Blk G37!!! Looks awesome.

 

Thanks diego,

I think the cv01 black machined would have looked nice also, but the 086 are def top 2 from vossen

 

Hey I just cancelled my order of Venaci wheels after seeing these. I want to run 20x10 all around what tire size do you think would be best without too much stretch and BTW I have a 2nd gen sedan so what offset would also be nice. The Venaci's I ordered were 20x9 +25 all around.

 

Get vossen +20 +25 for sure !!!

 

very nice.

 

20x10 +25 wont fit without running -5 to -6 degrees of camber and im not going to do that. does anyone know what offsets are available.

 

You are going to want high 30's for offsets maybe low 40's

 

vonyc said he ran +20 and +25 on the 086 with no spacers and normal camber though.

 

i would run low offset but they would stick out too much on my sedan. plus its AWD so i cant run a staggered setup.

 

Sedans are very different when it comes to offsets. sucks

Like i said to who ever PMED me:

Im running +10 front and +20 rear with stretched tires NORMAL CAMBER from factory.

If you look it up factory camber comes about -1.3 in the rear tires and -1.1 fronts SOMETHING AROUND THOSE NUMBERS

you cant run my offsets without stretched tire. If you dont want to be stretched then you gotta run - camber with normal tires.

THe +20 and +25 you can prolly pull it off with normal tires and a little bit of camber which wont be too bad. Remember camber isnt what wears out the tires, its the shop with the toe alignment.

 

So really the car in the shoot is running

Fronts: +10 offset
Rear: +5 offset

What size tyres / what width rims are these?

Did you have to run camber on the rears? (looks like you are running minimal?)

IMO the fitment is spot on at the front, and a little too aggressive for my liking on the rear (perfect for a shoot though!)

Nice work! Looks clean as!

 

Very nice! C L E A N !!

 

In these photos i am running +10 front and +20 rear

The tire size is 235/30/20 front and 255/30/20 rear

The width of these rims are 20x9.5 front and 20x10 rear

no - camber is being ran, just normal everyday daily driver camber which is about -1.1 to -1.5 .....

both the front and rear tires are straight like this > l__l ...
not like this /__/

 

ah ok, i read it that you were running 20mm spacers on the rear...

far out haha didn't realise +20 rears were so aggressive will be interesting to see how mine fit when i put them on

 

Beautiful pics!!