Girl with Red G37xS
Welcome to the site, glad you found us.
Nice looking red G you found.
As far as some help w/ cosmetic changes, here's a thread to look over and then browse the Media share sedan folders for more ideas.
https://www.myg37.com/forums/newbie-...read-this.html
Picture Share G Sedan - MyG37
And one more Epic thread
https://www.myg37.com/forums/g37-sed...ur-sedans.html
Nice looking red G you found.
As far as some help w/ cosmetic changes, here's a thread to look over and then browse the Media share sedan folders for more ideas.
https://www.myg37.com/forums/newbie-...read-this.html
Picture Share G Sedan - MyG37
And one more Epic thread
https://www.myg37.com/forums/g37-sed...ur-sedans.html
Once you get 10 posts and wait 24hrs you can post that in the classifieds.
Private Classifieds - MyG37
Private Classifieds - MyG37
Welcome, Poke around alot ! there are a lot of us with sedans ( Fellow X sedan) That have done a lot to their car.. Short rams :/ Eh wait till you can get cold airs.. Welcome and there's a lot of info here here.!
I have. Online and in person. Kyle at IPP is awesome and has some of the best pricing and service around. Do business with them in complete confidence. Legit.
Trending Topics
Registered Member
Joined: Jan 2015
Posts: 620
Likes: 82
From: California, USA
Welcome. Don't see very many red Gs around. Something about red paint that really pops when polished and waxed really well. I would do that soon, too.
That was quick 
I have the Injen SRI, no real trick except in my case the threads that hold the filter adapters had excess plastic that flowed into the threads so I had to use a tap to clean them up. If I didn't clean the threads I was worried I might snap a bolt as they really put up a fight until they were cleaned out. Also the painted tubes (mine are the gloss Black/gray) are very slippery when trying to clamp the rubber down tight, they want to slide up or down on those pipes so might want to lightly sand the area where those clamps go or a piece of electrical tape wrapped in that area to keep them from sliding.
You should be happy w/ that mod, easy to install and sound great.
I have the Injen SRI, no real trick except in my case the threads that hold the filter adapters had excess plastic that flowed into the threads so I had to use a tap to clean them up. If I didn't clean the threads I was worried I might snap a bolt as they really put up a fight until they were cleaned out. Also the painted tubes (mine are the gloss Black/gray) are very slippery when trying to clamp the rubber down tight, they want to slide up or down on those pipes so might want to lightly sand the area where those clamps go or a piece of electrical tape wrapped in that area to keep them from sliding.
You should be happy w/ that mod, easy to install and sound great.
