Lambo Doors=Next
Originally Posted by pdjafari
actually the doors stick out b/c of the design on the kit. i have seen it in person. you cant have the door go straight up b/c we use frameless windows and also b/c if the door were to go straight up it would clip the inside of the door panel. seen this kit on kelly's 350z and its sick. another thing is the locking mechanism will now allow the door to close 'downwards'...the door swings downwards but has to close like normal hence why it sticks out a tad.
BTW that 2k price tag is MSRP....the actual kit you can get for prob. 1200 or so...
BTW that 2k price tag is MSRP....the actual kit you can get for prob. 1200 or so...
ken i think it can be had for even <1k. vertical doors offers alot of sponsorships/partial ones...maybe if u applied they'd hook you up...not many G/Z's running around DC metro w/ vert doors 
Registered User
Joined: Jul 2005
Posts: 3,922
Likes: 0
From: University of Maryland
Originally Posted by wnt1bd
This was at the track Saturday.....
Greddy Twins with a stage 2 fuel sysytem.
Greddy Twins with a stage 2 fuel sysytem.
Registered User
Joined: Apr 2005
Posts: 988
Likes: 0
From: San Jose, CA
I recall seeing a thread that a guy in cali did on his vert doors. I think he paid around $1k for install. Of course he had a really high end setup. I think he paid like $5k for the whole thing.
ya lambo door installs need to be done right...and that can cost 1k alone. ive watched the labor...half the body panels need to be removed (front fenders, side skirts, doors...then sometimes they even need to weld/drill holes into your factory chassis....overall not something the dealership will care for. In addition ALL the wiring into the door (power door locks, speakers, power windows and everything else) needs to be extended from the stock grommet...as a vert. door will go up so requires longer wiring. You figure all that plus putting in the hinge and replacing body panels can take up to 8 hrs....so...usually they charge ~$100/hr so figure 6-8 hrs....for an average shop....