NationalGClub National G Club - Operating for the DC/MD/VA G35's and Surrounding Areas

Dyno VA/MD/DC?

Old Jul 13, 2005 | 07:36 AM
  #1  
Benj's Avatar
Benj
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 336
Likes: 0
From: Northern Va
Dyno VA/MD/DC?

Does anyone know where a Dyno is in the area? I am in Northern VA. Would like to get a baseline of the G35 before putting any mods on the car. Also any idea how much they charge?
Reply
Old Jul 13, 2005 | 07:42 AM
  #2  
mbq62's Avatar
mbq62
Registered User
 
Joined: Jan 2004
Posts: 2,022
Likes: 0
From: Fairfax, VA
Mach V had a dyno. So does AAM. Not sure how much they charge though.
Reply
Old Jul 13, 2005 | 08:21 AM
  #3  
Gmoney4's Avatar
Gmoney4
Registered User
 
Joined: Aug 2004
Posts: 285
Likes: 0
From: Scottsdale, AZ
Ultimate Performance near Dulles Town Center has one as well... No idea on the charge
Reply
Old Jul 13, 2005 | 08:26 AM
  #4  
pdjafari's Avatar
pdjafari
Registered User
iTrader: (2)
 
Joined: Jul 2004
Posts: 3,808
Likes: 0
From: DC/VA/MD
i think junior knows someone who knows someone who owes someone at Ultimate performance. Lets see if we can setup a dyno day there...
Reply
Old Jul 13, 2005 | 08:33 AM
  #5  
pdjafari's Avatar
pdjafari
Registered User
iTrader: (2)
 
Joined: Jul 2004
Posts: 3,808
Likes: 0
From: DC/VA/MD
wtf i cant start a new thread 'zero sized reply' error...anyone else gettign this when trying to post a new thread??
Reply
Old Jul 13, 2005 | 08:40 AM
  #6  
Pratik's Avatar
Pratik
Registered User
iTrader: (3)
 
Joined: May 2004
Posts: 3,825
Likes: 0
From: Washington, DC Area
Originally Posted by pdjafari
wtf i cant start a new thread 'zero sized reply' error...anyone else gettign this when trying to post a new thread??
"User Error"
Reply
Old Jul 13, 2005 | 09:01 AM
  #7  
Benj's Avatar
Benj
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 336
Likes: 0
From: Northern Va
Thx might head up to Dulles around July 30.
Reply
Old Jul 13, 2005 | 09:04 AM
  #8  
Benj's Avatar
Benj
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 336
Likes: 0
From: Northern Va
Found their site.

http://www.ultimateva.com
Reply
Old Jul 13, 2005 | 09:15 AM
  #9  
Benj's Avatar
Benj
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 336
Likes: 0
From: Northern Va
They do have group rates.

Special Group Rates

"*Special group rates are available during the year but must call for pricing and availability of time. Group ratings are designed for car clubs with 4 or more cars to be ran on the same day. "

http://www.ultimateva.com/dyno-4.htm

Normal cost is 85.00 for 3 pulls.
Reply
Old Jul 13, 2005 | 09:57 AM
  #10  
mbq62's Avatar
mbq62
Registered User
 
Joined: Jan 2004
Posts: 2,022
Likes: 0
From: Fairfax, VA
so who's down for some dynoing????
Reply
Old Jul 13, 2005 | 10:01 AM
  #11  
pdjafari's Avatar
pdjafari
Registered User
iTrader: (2)
 
Joined: Jul 2004
Posts: 3,808
Likes: 0
From: DC/VA/MD
Im IN, but I indeed DO have an exhaust leak which I will need to tighten and patch up otherwise my #'s will be alot lower than what they should be...
Reply
Old Jul 13, 2005 | 10:13 AM
  #12  
Benj's Avatar
Benj
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 336
Likes: 0
From: Northern Va
I am IN. Can't do this weekend picking the car up.

Can do anytime after this weekend. 7/23 or 7/30? Or during the week is fine too.
Reply
Old Jul 13, 2005 | 10:15 AM
  #13  
Benj's Avatar
Benj
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 336
Likes: 0
From: Northern Va
They are closed on Saturdays. M-F 9am until 6pm.
Reply
Old Jul 13, 2005 | 10:19 AM
  #14  
mbq62's Avatar
mbq62
Registered User
 
Joined: Jan 2004
Posts: 2,022
Likes: 0
From: Fairfax, VA
Originally Posted by pdjafari
Im IN, but I indeed DO have an exhaust leak which I will need to tighten and patch up otherwise my #'s will be alot lower than what they should be...
Damn you didn't fix it yet???
Reply
Old Jul 13, 2005 | 10:19 AM
  #15  
mbq62's Avatar
mbq62
Registered User
 
Joined: Jan 2004
Posts: 2,022
Likes: 0
From: Fairfax, VA
So we got 3 people. Need just one more....
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:45 AM.