Which springs are better???
Originally Posted by Stytch
hopefully the Z Htechs sit right on the tire when I put 20s on 
i'll get them hands down
i'll get them hands down
Nah, if you want a little above that just get the Z S-Tech's and get a camber kit. That'll look wont be SLAMMED but be slightly more than what you posted. On your 20's thats the look you want.
^That's how 20"s should look on the G. Not sure how drivable that car is but it looks great. The less rubber you have, the bigger the wheel gap will look. It's just the ratio between the gap and rubber. You see a lot of 20"s around but they're often 4x4s.
I don't think people actually drive around that low. I definitely wouldn't recomend it around this area. Jason, you got to figure out what's pratical you simply can't drive around this area daily with that kind of drop. I still recomend the H-Tech as it's the best of both world.
~Khoa
~Khoa
Thread Starter
Registered User
Joined: Feb 2006
Posts: 1,653
Likes: 0
From: Mitchellville, MD
Originally Posted by Pratik
Me, Puria, Junior run the 350Z H-Tech's. I personally like the drop. You may want to look at Espelier Springs. I think Jesus runs those but they're also good. You can't go wrong with the Tein Z H-Techs though.
No, you're 04 you're fine. One other one you may want to look at are the Tanabe springs. They are more slammed drop. Kinda like S-Tech. Just be prepared to buy some Tokico D-Spec's and some front and rear camber kits. If you want the slammed look its going to be expensive!! Even if you go coils you'll wanna get the camber kits.
Jason, have you bought any rims yet? I know were checking out some.
speaking of rims, where's glen and his 17's at lately? he used to troll these forum like crazy, but been very quiet.
~Khoa
speaking of rims, where's glen and his 17's at lately? he used to troll these forum like crazy, but been very quiet.
~Khoa
Originally Posted by LEK
Brian sees Jason rollin... he's hatin... cause Jason's ridin filthy.... that nigs ridin filthy... lol
Man here goes my name again ,,,.............HATERS.
Registered User
Joined: May 2005
Posts: 59
Likes: 0
From: Waldorf, MD
I got the same problem Jason does. I am running a 285/30/20 in the rear and I was gonna go with the H Techs. Hearing all of this makes me think that I just need to S Tech with a camber kit and roll my fenders. I want my wheels to tuck under the fender a little.
Btw, those wheels that Jason showed are the Axis Shine. Same huge lip as the Penta just in a 5 spoke. If anyone needs some holla at me. I got em for cheap.
Btw, those wheels that Jason showed are the Axis Shine. Same huge lip as the Penta just in a 5 spoke. If anyone needs some holla at me. I got em for cheap.
