When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The resistors that are included in the wiring of the plug and play kit. You can't use both the stock bulb and the resistors
Personally, I wouldn't leave the stock bulb in there. It kinda defeats the purpose of utilizing the clean factory LED assemblies
Nick C.
Right, it's one or the other. Electrically both (resistor + bulb) won't work as it'll confuse the BCM with the extra load.
Visually, I'd think having the bulb blink with the LED would be more effective than just the led ring. I'm looking at this from a functional perspective, not cosmetic or appearance. Anything to aid a distracted driver recognize intent to turn or perform a lane change.
Would I need to take off tail light to remove the stock bulb?? If yes would probably just keep them in just cause. Any problems if they were removed?
You don't need to remove the stock bulb, it's just no longer used at all. If you do want to remove the bulb though, yes, you'd need to take off your tail light. But it's totally fine just being left in there.
Nick C.
Last edited by Diode Dynamics; Jun 15, 2015 at 09:12 PM.
