LOL- I will have them when I get it,, I just paid for it today, .. I also will let everyone know what had to be done if anything to the H pipe to clear the T case.

 

u know what, i would cancel the order if i were you. They are making a new and improved RIIT for me. One that is designed to fix all the rapsy problems.

Some problems i have:

1. Raspy sound when RPM is down revving.
2. Puffing sound

I belive both problems came up because I have high flow cats which resulted in when the whole exhaust system is high flow, air goes out the back too quick(explained to me by exoticspeed technicians) and not enough back pressure in the exhaust.

The first generation, R1T had some drones, but mostly due to the fact of a bad install. One of the pipes were touching the wall. But this second generation i have have no drones.

I would wait till when the 3rd gen comes out and restricts the air a little more. They are making it right now and it'll be put on my car in around two weeks. So i say hold off the buy.

Quality of the pipes are amazing. The H pipes turn golden after a while. Really nice.

 

I just realized that it is a completely different exhaust that I was commenting on, not this one. I don't know anything about this exhaust. My bad.

 

Ug cant it shipped already.. I did not get ot from ExoticSpeed, I got for $100 less somewhere else.. I did end up getting the GEN 2 system, So the same sysytem you had on your car, I will not be running HFC's( Had serious issues before).. I actualy got it cause I liked the vid you made. So the Gen 2 has no droan, Thank good..Honestly I heard the flutter you are talking about when you REV'd it, But I had HFC's before and just figured it was from them.. Thanx for the input and the VID is awsome really help me make up my mind..

 

^ What "serious"issues did you have with HFC?

I think I purchased my Berk from you a while back. Don't worry though, I don't have it anymore. lol

 

Had I two different sets of them, Car would stumble,buck heisatate REAL BAD, Dealer had the car for 5 months, Took them off put the stockers back on and problem went away.. Not really sure what it was, but the dealer replaced a ton of stuff before putting the stockers back on,, ,both MAF's, Valve body, ECU, TCU, All the O2 sensors, Putting the stockers back on was the last thing left,, ..

 

Yep, im gonna take the high flows off. I think it'll solve all of the problems. Glad you like my videos, i guess i did my job as the research/test car. If you want more pictures, check this album out!

New Exhaust for Dai Lo | Facebook

 

Thanx for the pics man,, Yea you did your jog,, LOL

Hey question the passanger side of the Y pipi looks like ot goes WAY to the frame rai?? goes. .If it does I'm pumped means I do not have to have the pipe modded to fit the AWD( Clear the T case). Looks like it bends out further than the drivers( Pics of it leaning on a car also and under car pic)..

 

ummm the Y pipe is different for the AWD model. You need to custom a Y pipe to fit around the AWD transmission on the passenger side.

You know what, just 2 days ago, i was talking to the guy at exoticspeed. They are actually researching about it and most likely they gonna make one that will fit the AWD model. But for now, you needa custom one.

 

Thanx , Thats ok, I figured I was going to have to mod their Y pipe I bit no worries, Just got excited a little . LOL .. My Gen 3's are going in this week I hope.. The exhaust wont be for two weeks, :/..

 

:bounce:

 

Ding ding ding. We have a winnar.

 

An means exactly what?? The exhaust looks and sounds great, Heck if it copied a $1800 good for them.. Everyone copies no a days.. Have you seen a kit that did not look like anything else, ,the ARK looks like the HKS,, NO???

 

Install maybe pushed a week, They just emailed me and said the h pipe and mid pipe wont ship till Monday. .. My install was set up for Saturday.

 

Just got a call that there is a box on the porch. :0