stillen intake and catback installed
Registered User
Joined: Dec 2007
Posts: 68
Likes: 0
I agree.
They should make something that we could really use - may be 20HP & 20TQ
increase..hahah
I'll take some photos and also will post my dyno later.
I hope this helps others to decide what's best for them.
They should make something that we could really use - may be 20HP & 20TQ
increase..hahah
I'll take some photos and also will post my dyno later.
I hope this helps others to decide what's best for them.
Premier Member
Joined: Jul 2007
Posts: 3,346
Likes: 3
From: Colorado Springs, CO
There is a dyno sticky in the Engine forum so make sure you attach your dynos there so we can get a list. There are instructions in the thread on the format for your post. 
Oh and if you get some HFCs then you should be able to get close to that number. Solo is close to that with his FI exhaust and HFCs.
Oh and if you get some HFCs then you should be able to get close to that number. Solo is close to that with his FI exhaust and HFCs.
Premier Member
Joined: Feb 2007
Posts: 3,478
Likes: 1
From: So. Cal
intakes for our car suck as of now. injen will be worth it.
Exhauts for our cars ROCK! HFC's even better. done many tests on our car and you'll be better off doing research here b4 spending your money. search the forums b/c you will be very very surprised what u find.
Exhauts for our cars ROCK! HFC's even better. done many tests on our car and you'll be better off doing research here b4 spending your money. search the forums b/c you will be very very surprised what u find.
Registered User
Joined: Dec 2007
Posts: 68
Likes: 0
Stillen catback & long tube intake photos and dyno before and after
I hope this info is useful.
Here some photos and dyno on my G37S 6MT with/without
Stillen Long Tube intake and catback Exhaust.
"sorry I was little off on Dyno #s last night.
I left the dyno result at my work"
Here some photos and dyno on my G37S 6MT with/without
Stillen Long Tube intake and catback Exhaust.
"sorry I was little off on Dyno #s last night.
I left the dyno result at my work"
Last edited by bluenet123; Mar 31, 2008 at 01:58 PM.
Registered User
Joined: Nov 2007
Posts: 152
Likes: 0
I wouldn't buy an intake yet. Trust me and the other folks on the forum. I bought one of the first stillen long tube intakes. I had major Quality issues with it. The final product was ok, easy install and sounds good. I thought I felt a little more power but there is proof from independent shops that show very little increase. (cobbs) But if you really want a stillen I'll hook you up. I'm going back to stock with K&N's. Also am waiting for FI exhust and HFC's when I get them I'll post the results. Folks who want an intake be patient save $500+ for something better. Advice I got from Solo only to late. Solo thanks for the late input.
Last edited by chucky; Apr 2, 2008 at 02:07 AM.
