GB Blendmount for Valentine1 and Bel/Escort
09-15-2009, 10:18 PM
#1
Blendmount for Valentine1 and Bel/Escort
o.k. ladies and gentlemen, here is the group buy for mgt motorsport's blendmount for v1, escort passport 8500/9500 series, and all beltronics radar detectors. i've spoken with mike and frank at mgt motorsports and they will offer 20% off the price listed on their site.
MGT Motorsports.com
the bv1 works perfectly for the g37 and the list price is $49.00. the bv1 hinge adds more adjustability and retails for $69.00 (pre-discount price)
the bbe is manufactured only as a hinge and the price for it is $69.00 (pre-discount price)
also available for the group buy are hardwire options:
invisicord $18.99 (pre-discount) plugs into the back of your powered mirror.
a pillar hardwire $16.99 (pre-discout). wires to the fusebox and runs up the a pillar down the rearview mirror stalk to your detector
for those concerned about security and ease of removal, detectors can be dismounted in less than 3 seconds. also, the mounts are small and discreet enough that they are almost invisible without a detector attached. i will take pictures from outside of the car and post if requested.
this group buy will end on September 30, 2009. if you want to receive your mount earlier, i can have them drop shipped direct from mgt motorsports once i receive your payment (2-3 days). otherwise, i will have them shipped to my location, work out shipping costs, and give you a total through private messaging on this forum.
please post up if you want one and include the model and any accessories you want.
thanks everyone,
ian
edit: for those of you who haven't seen the review. https://www.myg37.com/forums/audio-v...nd-review.html
MGT Motorsports.com
the bv1 works perfectly for the g37 and the list price is $49.00. the bv1 hinge adds more adjustability and retails for $69.00 (pre-discount price)
the bbe is manufactured only as a hinge and the price for it is $69.00 (pre-discount price)
also available for the group buy are hardwire options:
invisicord $18.99 (pre-discount) plugs into the back of your powered mirror.
a pillar hardwire $16.99 (pre-discout). wires to the fusebox and runs up the a pillar down the rearview mirror stalk to your detector
for those concerned about security and ease of removal, detectors can be dismounted in less than 3 seconds. also, the mounts are small and discreet enough that they are almost invisible without a detector attached. i will take pictures from outside of the car and post if requested.
this group buy will end on September 30, 2009. if you want to receive your mount earlier, i can have them drop shipped direct from mgt motorsports once i receive your payment (2-3 days). otherwise, i will have them shipped to my location, work out shipping costs, and give you a total through private messaging on this forum.
please post up if you want one and include the model and any accessories you want.
thanks everyone,
ian
edit: for those of you who haven't seen the review. https://www.myg37.com/forums/audio-v...nd-review.html
Last edited by speedracer g37; 09-15-2009 at 10:32 PM.
09-15-2009, 11:14 PM
#4
lets start a list and i can pm everyone depending on location. discounted prices are as follows:
bv1: $39.25
bv1 hinge: $55.20
bbe: $55.20
depending on the amount of interest, we may be get a better discount than 20%.
please copy, paste, and add you name to the list
1. wakeboardr116
2. raizon
bv1: $39.25
bv1 hinge: $55.20
bbe: $55.20
depending on the amount of interest, we may be get a better discount than 20%.
please copy, paste, and add you name to the list
1. wakeboardr116
2. raizon
Trending Topics
09-17-2009, 02:56 AM
#10
So the hinge one for the escort comes with that clip like that?(the part that actually clips into the detector)
If so i might have to upgrade.
I have the mikes mount, which is essentially the same as bv1 with no hinge, but you attach the suction mount to it with screws, so it bounces a lil bit.
If so i might have to upgrade.
I have the mikes mount, which is essentially the same as bv1 with no hinge, but you attach the suction mount to it with screws, so it bounces a lil bit.
09-18-2009, 03:36 PM
#14
Hey I want one too but I'm confuse by those 3 pictures. I have a beltronic RX65 and I want it like how the second picture is. I don't know wth 1 and 2 is. I already have a stealthcord so I just need the mount.
1. wakeboardr116
2. raizon
3. whosurbuddee (bbe)
4. bbelcher
5. gaddamit (bbe and invisicord)
6. Stardust (bbe and invisicord)
7. JNguyen
1. wakeboardr116
2. raizon
3. whosurbuddee (bbe)
4. bbelcher
5. gaddamit (bbe and invisicord)
6. Stardust (bbe and invisicord)
7. JNguyen