G37 Won't start
#1
Registered Member
Thread Starter
Join Date: Feb 2009
Location: NorCal
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
G37 Won't start
My 08 G is not starting up anymore. After installing new intake. I went for an hour drive. Parked the car overnight. Moved the car out to wash, when I tried to move the car back in the garage. It won't start. Dashboard light lit up, when I tried to roll up the windows. The light went on and off. Is it the battery dead?
#5
Registered User
Join Date: Aug 2007
Location: West Texas
Posts: 1,137
Likes: 0
Received 0 Likes
on
0 Posts
was the car running while u were washing ur car? otherwise i agree with bj
another thing could just be battery issue, try jump starting, if not then go with the bj's advice
another thing could just be battery issue, try jump starting, if not then go with the bj's advice
#6
Registered Member
Thread Starter
Join Date: Feb 2009
Location: NorCal
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
after installing
I installed intake last night. After finished the installation, I did take the G for an hour ride. With no problem. No warning light or anything. This morning decided to wash the car. Moved the car out finished washing it. Tried to move the car back in.. then it won't start..
Trending Topics
#8
Registered Member
Thread Starter
Join Date: Feb 2009
Location: NorCal
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
removing
I don't know about the clicking.. the brake pedal is really hard to step down too...
Should I removed everything? I got ground wire kit installed couple of months ago...
Should I removed everything? I got ground wire kit installed couple of months ago...
Last edited by LuckyLuke; 10-23-2009 at 05:01 PM.
#10
Registered Member
Thread Starter
Join Date: Feb 2009
Location: NorCal
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
jumpstart...
I got one of those battery charge. I charged and it started up. I went for a drive. Everything seem fine, but when I set the alarm for the car. It doesn't honk anymore. Instead it flashed the red car icon with the key.. and right signal light?
Does that mean I need to reset the ECU? when I installed the intake. I did unhook the negative wire for over 2 hours. after that I went for an hour drive.
Does that mean I need to reset the ECU? when I installed the intake. I did unhook the negative wire for over 2 hours. after that I went for an hour drive.
#11
Registered User
iTrader: (12)
Join Date: Jan 2008
Location: Central and South Florida
Posts: 1,342
Likes: 0
Received 0 Likes
on
0 Posts
I believe there's a setting on the nav. screen that let you set your alarm, to honk and blink lights, or just blink lights. your setting probably resetted to default when you unplugged the battery.