Thank you fellas, I am 80% on completing the side skirts for the sport, the Non sport will be Alot more easier because of the simple design of them. Will post pictures as soon as I get them done

 

This post of yours makes me even more excited about those side moldings, you really are a fabrication artist!
https://www.myg37.com/forums/3719091-post2325.html

 

Hey VT, is the Journey lip going to look similar to the one on your G? I like it!!!

 

Yes, okay all of my lip/splitters will make every front end 1.5" lower. the bottom of the lips will be the same but the top will be bumper specific.

 

+1 on the awesome looking headlights on your sedan, VT. The contrast between chrome and black is perfect.

 

Confirmed today that BT Aero is no longer producing the spats due to "low demand," so this is the only game in town! (I'm not counting the actual kenstyle pieces as a viable alternative.)


VT: bring on the pics!


Also, please make the rear spats compatible with the a/x diffuser


I saw your car has the rear mudguards - assuming your plan is to remove those for the rear pieces, and have them only work without the stock pieces in place? (My car has the mudguards as well.)


thanks again!!!

 

Yes, I personally have the A/x diffusser on my sedan and Yes it will be made to go with that diffuser, but also look in place for those that don't have the diffuser.

I am makiking the rear splats and the side skirts to go without the OEM splash guards. I am doing it this way so that it will look clean and the lines will flow easily with the side skirts and rear lips all together

**But the good news is that you will be able to cut the side skirts and rear splats to work around the OEM splash guards, Since they will be made from Plastic and not Fiberglass!!


I will post pictures of the prototype before I make any of them, to get a design approval from you all.

Soon guys soon!

 

Awesome consideration, looks like you're really putting a lot of planning into these, thanks for all your legwork to make this happen.

 

VT any luck on finding a 2010+ test fitter? Really want to see this get done for us folk as well!

 

Definitely interested and subscribed.

Also how about a black ABS plastic front splitter for the sport bumper to match?

I'd be willing to be a test fitter, location?

 

Would love a rear splitter for the IPL sides and rear

 

Yes! that is one of the most demanded splitters, 2010+ sport bumper. I have a test fitter for the 2010+ journey bumper but still NO sport bumper fitter, I mihgt just end up buying a front sport 2010 bumper if no one is available in Portland/vancouver area.

Vancouver WA

2010+ journey bumper- Yes
2010+ sport bumper, No, might just end up buying a sport bumper to use for this purpose and then resell it.



I have been busy with life, moved to a new home this past weekend. So I will now resume the prototype building.

I will do my best to knock this out in the next 2 weeks tops.(Side skirts, for both 2007+ sport and journey).

Then the rear splats for the 2007-2009.

Thank you all for your interest and paitiance!!!!

 

Coupe IPL????
My yonger bro has the G37 coupe with the IPL front end but no sides/ rear.
But yes that would be possible with a tester vehivle, BUT only after I get my fellow sedan drivers set up Im a sedan owner and looking forward to having a splitter lip that looks like that of the GTR R34 Nismo lip kit.

All before Spring and summer, to be show ready

 

I can't wait to see it man. Sounds nice!

 

Fantastic! Looking forward to adding this. And you said you are working on the front splitter and rear diffuser as well? Or are those ready? Looking to add this whole kit to my 2011 G37XS Sedan.