When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Did you use the trailer hitch hack from this site? I'm thinking about doing this as I ride my bike quite often and I need to stop using my son's car to tote my bike.
It was there when I bought the car, I believe the original owner had it put on. Wish I could help more. If the aesthetics of it don't bother you I say go for it though.
Originally Posted by 2GoRNot2G
Good for you! I have a Jeep Wrangler and Ram 2500 for the utilitarian stuff, but it's nice to see someone using their G for something other than commuting.
Thanks! I have BC Racing coilovers and living with the dreaded clunking noise unfortunately.
Should be a relatively easy fix. I was getting a weird popping/clunking sound 2 weeks after installing my BC BR coilovers, sounded like robots making mechanical popcorn in my trunk area. Turned out that all I needed to do was tighten up the bottom lock ring, it was loose when I reached through my wheel and checked it on my driver's side. The amount of turn was minimal to get them locked down good and tight. I hope this helps to resolve your clunking issue and is not any other issue. Be well.
Thanks! I have BC Racing coilovers and living with the dreaded clunking noise unfortunately.
Front had not settled yet. Approximately 300 miles after install. Front had not settled yet. Approximately 300 miles after install. Front had settled pretty well but we did adjust the ride height a little more than an inch lower. I LOVE the fitment, general overall seating/stance, handling, and suspension so much now. I LOVE the way she starting to look. Custom shaped and formed splitters & diffusers coming soon!
Front had not settled yet. Approximately 300 miles after install. Front had not settled yet. Approximately 300 miles after install. Front had settled pretty well but we did adjust the ride height a little more than an inch lower. I LOVE the fitment, general overall seating/stance, handling, and suspension so much now. I LOVE the way she starting to look. Custom shaped and formed splitters & diffusers coming soon!
Looking good, Dopeness! Can't wait for updated pics once you get the new parts installed.
Thanks fellas. Always nice to receive some kudos for the work we put in. I have a good group of friends in Distinct Car Club that help me with my project.
Should be a relatively easy fix. I was getting a weird popping/clunking sound 2 weeks after installing my BC BR coilovers, sounded like robots making mechanical popcorn in my trunk area. Turned out that all I needed to do was tighten up the bottom lock ring, it was loose when I reached through my wheel and checked it on my driver's side. The amount of turn was minimal to get them locked down good and tight. I hope this helps to resolve your clunking issue and is not any other issue. Be well.
Hey, thanks for the suggestion! I took a look at them not too long ago and the pssenger's side was a bit loose. I tightened everything up and still have the same issue. I'm not sure what to do anymore than to just live with it.
Great shot, MaQ! Hopefully you just dropped it for the pic and you aren't really driving it that low... looks like your exhaust might actually be touching the ground. LOL
