Looking for a picture of the under-neath of a G37 factory spoiler, If you check my other thread on the replica spoiler you'll see why. Thanks!

 

Great question. I was wondering the same thing. Does the wing use tape to hold it down as well?

 

My replica used 2 nuts and the 3m tape. Thing is im not happy with the replica, and i don't want to go put more holes into the trunk.

 

I just removed the inner trunk liner and took some pictures. Looks like there is three (small) nuts clamping down three studs from the factory spoiler. I didn't remove the nuts yet and try pulling off the spoiler. It looks like there is tape all around the perimeter of the spoiler.

 

please post those pics!!, are their any nuts on the 2 far ends of the spoiler? there is 3M all over the rim of the spoiler under-neath, those pics would come in handy for me if you can post them for me.

 

Yes me too, I actually don't care for the chrome spoiler and was wondering what it looks naked. Maybe more sleek?

 

Give me a little while to upload those pictures (it takes my camera forever).

I do not see any nuts on the ends. One dead center, and one about 6-8 inches on each side of the center one.

 

Not even bro.

 

Dammit

 

How hard is it to do the chrome lip to rear mounted spoiler conversion btw? Does it come pre-painted by color code?

 

 

Well you definitely have to put holes into the trunk, Match them up perfectly (takes sometime), Wire the brake light, not that hard.

 

what about paint? Also has anyone developed an aftermarket lip replacement?

 

There are definately some differences between those trunks.

 

So those are the only 2 screws you see there?