Engine, Intake and Exhaust Subforum dedicated to breather or engine mods (intakes, exhaust, pulleys, N/A mods etc.)

M2 Performance exhaust review

Thread Tools
 
Search this Thread
 
Old Jan 27, 2013 | 05:28 PM
  #1  
willstophe's Avatar
willstophe
Thread Starter
Registered Member
 
Joined: Dec 2008
Posts: 589
Likes: 21
From: Irvine, CA
M2 Performance exhaust review

Good day. It is appropriate to take a moment to review the product for contribution to the community.

The exhaust section was for the rear. Fitment was very unproblematic. The installation took place at home. All the gaskets and bolts included were decent quality with no issues. The quality of the mufflers themselves were exceptional, made from 304 stainless steel. After installation was completed, the sound improvement was deeper. Drone was very limited. The exhaust sound is quiet at idol, and at high revs the sound was clean and humble, yet exotic and throaty. The price paid was 240 dollars picked up in City of Industry from Autogrimmig. This price was very reasonable. Comparable models average in the 600-900 dollar range, making the product a rare, but excellent find. Unfortunately, a quality camcorder to provide a sound clip is not available at this moment. However, a sound clip will later be posted upon availability. If there are any more questions, feel free to ask. Thank you for taking the moment to read this review. Comments are welcomed and appreciated.
Reply
Old Jan 27, 2013 | 06:32 PM
  #2  
blnewt's Avatar
blnewt
Movin On!
iTrader: (13)
 
Joined: Nov 2009
Posts: 24,876
Likes: 4,949
I assume this is the product being reviewed~Don't the coupes have resonated mid pipes?
Pretty good saving $80 by being able to pick it up
Infiniti 08-11 G37 Coupe M2 Performance Stainless Steel Catback Exhaust
Reply
Old Jan 27, 2013 | 06:41 PM
  #3  
willstophe's Avatar
willstophe
Thread Starter
Registered Member
 
Joined: Dec 2008
Posts: 589
Likes: 21
From: Irvine, CA
Originally Posted by blnewt
I assume this is the product being reviewed~Don't the coupes have resonated mid pipes?
Pretty good saving $80 by being able to pick it up
Infiniti 08-11 G37 Coupe M2 Performance Stainless Steel Catback Exhaust
Correct. That would be the product.
Reply
Old Jan 28, 2013 | 09:58 AM
  #4  
Alkatraz's Avatar
Alkatraz
Registered User
 
Joined: Aug 2011
Posts: 191
Likes: 21
Originally Posted by willstophe
Good day. It is appropriate to take a moment to review the product for contribution to the community.

The exhaust section was for the rear. Fitment was very unproblematic. The installation took place at home. All the gaskets and bolts included were decent quality with no issues. The quality of the mufflers themselves were exceptional, made from 304 stainless steel. After installation was completed, the sound improvement was deeper. Drone was very limited. The exhaust sound is quiet at idol, and at high revs the sound was clean and humble, yet exotic and throaty. The price paid was 240 dollars picked up in City of Industry from Autogrimmig. This price was very reasonable. Comparable models average in the 600-900 dollar range, making the product a rare, but excellent find. Unfortunately, a quality camcorder to provide a sound clip is not available at this moment. However, a sound clip will later be posted upon availability. If there are any more questions, feel free to ask. Thank you for taking the moment to read this review. Comments are welcomed and appreciated.
Holy short sentences Batman!!!
Reply
Old Feb 7, 2013 | 11:11 AM
  #5  
pgviper's Avatar
pgviper
Registered User
 
Joined: Oct 2012
Posts: 183
Likes: 4
From: Long Island
Is this a catback or axleback exhaust. Its advertised as a catback but is in the price range of just the mufflers. Also, the picture only shows the mufflers.
Reply
Old Feb 7, 2013 | 12:02 PM
  #6  
willstophe's Avatar
willstophe
Thread Starter
Registered Member
 
Joined: Dec 2008
Posts: 589
Likes: 21
From: Irvine, CA
Originally Posted by pgviper
Is this a catback or axleback exhaust. Its advertised as a catback but is in the price range of just the mufflers. Also, the picture only shows the mufflers.
It is simply the mufflers.
Reply
Old Jun 20, 2013 | 11:39 AM
  #7  
jasunto's Avatar
jasunto
Registered User
 
Joined: Apr 2013
Posts: 7
Likes: 0
From: Orlando, FL
I just orderd for $230 shipped on ebay. I see this post was a while back though. Ill let you know how i like them. Did the tips line up perfectly in the cut outs of the bumper?
Reply
Old Jun 20, 2013 | 12:13 PM
  #8  
willstophe's Avatar
willstophe
Thread Starter
Registered Member
 
Joined: Dec 2008
Posts: 589
Likes: 21
From: Irvine, CA
Originally Posted by jasunto
I just orderd for $230 shipped on ebay. I see this post was a while back though. Ill let you know how i like them. Did the tips line up perfectly in the cut outs of the bumper?
I had no fitment issues. It aligned just fine with the car.
Reply
Old Jun 20, 2013 | 12:19 PM
  #9  
G37Sam's Avatar
G37Sam
Administrator
 
Joined: Aug 2008
Posts: 12,173
Likes: 244
From: Doha, Qatar
Is a quality camcorder to provide a sound clip still not available?
Reply
Old Jun 20, 2013 | 12:20 PM
  #10  
willstophe's Avatar
willstophe
Thread Starter
Registered Member
 
Joined: Dec 2008
Posts: 589
Likes: 21
From: Irvine, CA
Originally Posted by G37Sam
Is a quality camcorder to provide a sound clip still not available?
I do not have a quality camcorder. I have a phone but that is not an accurate methodology collecting a soundbite.
Reply
Old Jul 9, 2013 | 02:46 PM
  #11  
use2vw's Avatar
use2vw
Registered User
iTrader: (2)
 
Joined: May 2010
Posts: 156
Likes: 2
How about any pics..I'm thinking of using these for my EX37 project....Thanks!
Reply
Old Jul 9, 2013 | 03:05 PM
  #12  
willstophe's Avatar
willstophe
Thread Starter
Registered Member
 
Joined: Dec 2008
Posts: 589
Likes: 21
From: Irvine, CA
Originally Posted by use2vw
How about any pics..I'm thinking of using these for my EX37 project....Thanks!
I don't think the G37 platform is the same as the EX37. Otherwise sure when I get the chance I'll snap a couple with the crappy camera phone I have.
Reply
Old Jul 10, 2013 | 01:08 PM
  #13  
use2vw's Avatar
use2vw
Registered User
iTrader: (2)
 
Joined: May 2010
Posts: 156
Likes: 2
Wana say it's should be a direct bolt on... maybe need to extend the tips, but should work. Really wish you could get a decent sound clip. For the $200 or so on ebay..I may just take the chance anyway.
Reply
Old Jul 10, 2013 | 01:43 PM
  #14  
Brian Spilner's Avatar
Brian Spilner
Registered User
 
Joined: Jul 2013
Posts: 8
Likes: 0
Originally Posted by G37Sam
Is a quality camcorder to provide a sound clip still not available?
i lol'd.
Reply
Old Jul 12, 2013 | 01:07 PM
  #15  
use2vw's Avatar
use2vw
Registered User
iTrader: (2)
 
Joined: May 2010
Posts: 156
Likes: 2
no pics or sound clips(even if it's crappy cell phone) yet?
Reply



All times are GMT -4. The time now is 02:02 AM.