Engine, Drivetrain & Forced-Induction
Have Technical Questions or Done Modifications to the G37? Find out the answer in here!

Help 08 g37MT Clutch issue

Thread Tools
 
Search this Thread
 
Old Aug 22, 2016 | 04:56 PM
  #1  
michael138's Avatar
michael138
Thread Starter
Registered User
 
Joined: Jul 2016
Posts: 5
Likes: 0
From: Fort Collins, CO
08 g37MT Clutch issue

I have read a bunch of descriptions of clutch issues with this car, but I am experiencing a couple of novel issues.

1. Clutch fell to the floor on my way home on Friday. I was able to nurse it back home (4 blocks) by lifting it with my toe and shifting into 2nd. After turning the car off and pumping the clutch, it no longer falls to the floor. There is pressure, but only at the very bottom of travel.

2. No fluid leak or loss as far as I could tell. Level was exactly between L and H when I looked. Topped it off and nothing changed.

3. If I start the car and push the clutch, I can move through the gears but releasing the clutch does absolutely nothing (no catch, no stall, no noise).

4. The tension on the clutch is weak and about half the normal travel. It feels like there is a very slight engagement point, but it does nothing.

I've spoken to a couple of shops and the are confounded by these symptoms (especially being able to move it through the gates with the broken clutch depressed). Can anyone tell me what might cause these specific symptoms.

Thanks!
Reply
Old Aug 30, 2016 | 11:58 AM
  #2  
demo401's Avatar
demo401
Registered User
 
Joined: Dec 2015
Posts: 94
Likes: 14
From: Providence, RI
Originally Posted by michael138
I have read a bunch of descriptions of clutch issues with this car, but I am experiencing a couple of novel issues.

1. Clutch fell to the floor on my way home on Friday. I was able to nurse it back home (4 blocks) by lifting it with my toe and shifting into 2nd. After turning the car off and pumping the clutch, it no longer falls to the floor. There is pressure, but only at the very bottom of travel.

2. No fluid leak or loss as far as I could tell. Level was exactly between L and H when I looked. Topped it off and nothing changed.

3. If I start the car and push the clutch, I can move through the gears but releasing the clutch does absolutely nothing (no catch, no stall, no noise).

4. The tension on the clutch is weak and about half the normal travel. It feels like there is a very slight engagement point, but it does nothing.

I've spoken to a couple of shops and the are confounded by these symptoms (especially being able to move it through the gates with the broken clutch depressed). Can anyone tell me what might cause these specific symptoms.

Thanks!
Slave cylinder
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TommyGunnZ33
Engine, Drivetrain & Forced-Induction
17
Aug 24, 2022 10:50 PM
4DRZ
Motorsports / Track
17
Jun 17, 2016 03:03 PM
msonbolg37x
Engine, Drivetrain & Forced-Induction
0
Apr 20, 2016 08:29 PM
msonbolg37x
Drivetrain
4
Apr 11, 2016 10:58 PM
armino41
G37 Coupe
8
Mar 30, 2016 01:25 PM




All times are GMT -4. The time now is 12:50 AM.