Engine, Drivetrain & Forced-Induction
Have Technical Questions or Done Modifications to the G37? Find out the answer in here!

Help 6MT Stalling at red light

Old Apr 1, 2015 | 03:31 PM
  #1  
Steve 21's Avatar
Steve 21
Thread Starter
Registered User
 
Joined: Sep 2014
Posts: 43
Likes: 4
From: Staten Island, NY
Exclamation 6MT Stalling at red light

I installed the stillen gen 3 cold air intakes about 2 months ago. Car has been running flawlessly until a few weeks ago. First encounter was in the morning coming out to my car, starting and then the rpm's just dropped and car stalled while I had car in first gear but clutch depressed. Started it back up and stalled again.

Now on two different occasions pulling up to a red light and putting the car in neutral and sitting doing nothing, the rpms bounce and if I didn't catch it in time it stalled on me.

Any suggestions of what it can possibly be?

-P.S. I did not get a tune after the install of the intake. I was wondering if that may be the problem but I have read of many people installing the intakes and never doing a tune.

Thanks in advance

Last edited by Steve 21; Apr 1, 2015 at 03:38 PM.
Reply
Old Apr 1, 2015 | 06:31 PM
  #2  
Kris 3.7's Avatar
Kris 3.7
Registered User
iTrader: (1)
 
Joined: Sep 2014
Posts: 89
Likes: 13
From: Orlando
Might be dirty MAF sensors, would be quick and easy to clean them up with some MAF cleaner. If that doesn't do it maybe something throttle body related. I'd start with the MAF's first.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
andrewk523
Private Classifieds
5
Nov 11, 2015 05:49 PM
inspector94
Engine, Drivetrain & Forced-Induction
8
Sep 8, 2015 12:57 PM
bingpwr
Private Classifieds
1
Sep 4, 2015 09:44 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 02:38 AM.