QX56/Titan 5.6L V8 Engine swap Q's
I know its not the cheapest route or most practical but it would be bad a$$ 
I had looked into this before building my 3.8L TT G35. I wish i would have done the VK56 swap instead.
One of the issues the G35 guys ran into was the intake plenum wouldn't clear the hood, so a cowl or custom intake with shorter runners would be required I assume the G37 would have similar issues. I would do it and run a couple of GT-30s or GT-35s on the stock bottom end it would be a monsTTer.
This thing sounds so sickkk
http://www.youtube.com/watch?v=gOtYO...layer_embedded

I had looked into this before building my 3.8L TT G35. I wish i would have done the VK56 swap instead.
One of the issues the G35 guys ran into was the intake plenum wouldn't clear the hood, so a cowl or custom intake with shorter runners would be required I assume the G37 would have similar issues. I would do it and run a couple of GT-30s or GT-35s on the stock bottom end it would be a monsTTer.
This thing sounds so sickkk
http://www.youtube.com/watch?v=gOtYO...layer_embedded
That's uber cheap especially since you're going from a V6 to an inline 6. It's a pain in the *** to do that swap.
I know its not the cheapest route or most practical but it would be bad a$$ 
I had looked into this before building my 3.8L TT G35. I wish i would have done the VK56 swap instead.
One of the issues the G35 guys ran into was the intake plenum wouldn't clear the hood, so a cowl or custom intake with shorter runners would be required I assume the G37 would have similar issues. I would do it and run a couple of GT-30s or GT-35s on the stock bottom end it would be a monsTTer.
This thing sounds so sickkk
YouTube - Supercharged V8 G35 Drifting

I had looked into this before building my 3.8L TT G35. I wish i would have done the VK56 swap instead.
One of the issues the G35 guys ran into was the intake plenum wouldn't clear the hood, so a cowl or custom intake with shorter runners would be required I assume the G37 would have similar issues. I would do it and run a couple of GT-30s or GT-35s on the stock bottom end it would be a monsTTer.
This thing sounds so sickkk
YouTube - Supercharged V8 G35 Drifting
I wonder if we can stick LS2's in the G37 LOL. I know they do it to 350z no problems, perhaps we could even get a new motor than the ls2s!
YouTube - engine view of the ls2 350z
YouTube - LS2 350z take off
imaging that shiiiiet!
or this!
YouTube - Noah's 350Z 1
I swear if I had my g35 I would so stick a v8 in one for fun and push the limits.
YouTube - engine view of the ls2 350z
YouTube - LS2 350z take off
imaging that shiiiiet!
or this!
YouTube - Noah's 350Z 1
I swear if I had my g35 I would so stick a v8 in one for fun and push the limits.
Owner of that G35 would abuse the shiat out of that engine till it blows, then get another one for less than a grand lol
RBs and JZs seem to be the way to go here
I wonder if we can stick LS2's in the G37 LOL. I know they do it to 350z no problems, perhaps we could even get a new motor than the ls2s!
YouTube - engine view of the ls2 350z
YouTube - LS2 350z take off
imaging that shiiiiet!
or this!
YouTube - Noah's 350Z 1
I swear if I had my g35 I would so stick a v8 in one for fun and push the limits.
YouTube - engine view of the ls2 350z
YouTube - LS2 350z take off
imaging that shiiiiet!
or this!
YouTube - Noah's 350Z 1
I swear if I had my g35 I would so stick a v8 in one for fun and push the limits.


