Engine, Drivetrain & Forced-Induction
Have Technical Questions or Done Modifications to the G37? Find out the answer in here!

Help CEL and codes .. help out

Thread Tools
 
Search this Thread
 
Old May 4, 2009 | 11:55 PM
  #1  
VONYC's Avatar
VONYC
Thread Starter
Registered User
iTrader: (1)
 
Joined: Aug 2008
Posts: 1,134
Likes: 0
From: MIAMI
CEL and codes .. help out

Alright so i was driving all day .. i didnt drive like an A$$ at all ...

Last time i get in my car and the CEL turns on .. FML ..

lol its not my HFC alreast i dont think it is ... i had the stage 2+ map on my car.. i dont have headers but my AFR were like 14 high 13...

i kept it at that and my car was running normal ... I just changed to the stock style map right now and no CEL ... cuz it reset the ECU ..

Well i got on the cobb and looked up the codes to read and it gave me

BCM
C1708
C1709
C1710
C1711

IF anyone know what these codes mean and post it for me i would really appreciate it ..

thanks !
Reply
Old May 5, 2009 | 09:08 AM
  #2  
VONYC's Avatar
VONYC
Thread Starter
Registered User
iTrader: (1)
 
Joined: Aug 2008
Posts: 1,134
Likes: 0
From: MIAMI
anyone ?
Reply
Old May 5, 2009 | 09:19 AM
  #3  
tristan1334's Avatar
tristan1334
Registered User
 
Joined: Jul 2008
Posts: 349
Likes: 5
From: Virginia
Body Control Module controls most electronic function except engine. Mine lit up when I lower my tire pressure(track/drag) and when that idiot ran my car on the dyno with VDC on. My friend broke one of the tire sensors and it threw a BCM code. But if you cleared it using the AP then it should not come back. Hope that helps.
Reply
Old May 5, 2009 | 09:23 AM
  #4  
VONYC's Avatar
VONYC
Thread Starter
Registered User
iTrader: (1)
 
Joined: Aug 2008
Posts: 1,134
Likes: 0
From: MIAMI
That helps a lot actually ... I am not running with my tpms sensors that's why it came out right ?

Thanks
Reply
Old May 5, 2009 | 09:32 AM
  #5  
tristan1334's Avatar
tristan1334
Registered User
 
Joined: Jul 2008
Posts: 349
Likes: 5
From: Virginia
Yup, that's the problem. Don't worry there's no performance loss on that.
Reply
Old May 5, 2009 | 09:35 AM
  #6  
VONYC's Avatar
VONYC
Thread Starter
Registered User
iTrader: (1)
 
Joined: Aug 2008
Posts: 1,134
Likes: 0
From: MIAMI
Alright lol I thought it was the stage 2+ map
making my car run lean or something ...

Do you know if it's going to keep popping up ??
Reply
Old May 5, 2009 | 09:45 AM
  #7  
tristan1334's Avatar
tristan1334
Registered User
 
Joined: Jul 2008
Posts: 349
Likes: 5
From: Virginia
Yes it will till you put the tpms back on. I wouldn't use stage2+ unless you have headers.
Reply
Old May 5, 2009 | 09:47 AM
  #8  
VONYC's Avatar
VONYC
Thread Starter
Registered User
iTrader: (1)
 
Joined: Aug 2008
Posts: 1,134
Likes: 0
From: MIAMI
what map would u use ? the stock style map ?
Reply
Old May 5, 2009 | 09:56 AM
  #9  
NJlakeshoreG's Avatar
NJlakeshoreG
Registered Member
iTrader: (1)
 
Joined: Jul 2005
Posts: 2,772
Likes: 2
From: giants stadium
stock style map, is the factory tune...no performance enhancements...NONE at all....believe me, if not ask cobb............
Reply
Old May 5, 2009 | 02:48 PM
  #10  
VONYC's Avatar
VONYC
Thread Starter
Registered User
iTrader: (1)
 
Joined: Aug 2008
Posts: 1,134
Likes: 0
From: MIAMI
so what map should i use lol ?
Reply
Old May 5, 2009 | 02:54 PM
  #11  
C@ciQ's Avatar
C@ciQ
Registered User
iTrader: (3)
 
Joined: Feb 2008
Posts: 988
Likes: 0
Bro I told u Stage 2 because it was richer than 2+.
Reply
Old May 5, 2009 | 02:57 PM
  #12  
C@ciQ's Avatar
C@ciQ
Registered User
iTrader: (3)
 
Joined: Feb 2008
Posts: 988
Likes: 0
If it is the TPMS warning light should pop not the CEL. Anyways u can clear em out.
Reply
Old May 5, 2009 | 03:27 PM
  #13  
VONYC's Avatar
VONYC
Thread Starter
Registered User
iTrader: (1)
 
Joined: Aug 2008
Posts: 1,134
Likes: 0
From: MIAMI
I did clear them and they both come out after an hour ... I called infiniti they said the CEL will NOT come out if u don't have sensors .. So it's something else ... I've had my hfc on for about a month n it never gave me s light till now ...
Reply
Old May 5, 2009 | 04:01 PM
  #14  
VONYC's Avatar
VONYC
Thread Starter
Registered User
iTrader: (1)
 
Joined: Aug 2008
Posts: 1,134
Likes: 0
From: MIAMI
nvm .. i did some more looking around with the cobb and looked at it with the car on and off and i found out what the CEL is on for ...

P0430
TW catalytic system Bwk 2

something like that ..

so i guess it is my HFC .. DANM !

so how do i get that fixed lol ?
Reply
Old May 5, 2009 | 04:04 PM
  #15  
aliiin's Avatar
aliiin
BMW Defector
iTrader: (5)
 
Joined: May 2008
Posts: 4,588
Likes: 16
From: Texas
dang that sucks.... how long did you have your HFC's for before it came on? how many miles were put on it?
Reply



All times are GMT -4. The time now is 09:20 AM.