Over the years and even recently I have had several requests from folks wanting a copy of the installation guide for the JDM/OEM mirror winker kit. I do not know why as the guide is in Japanese but folks still ask for it... ¯\_(ツ)_/¯

I decided to have the guide scanned and posted here for anyone who wants them (pdf attached below). Also included in the pdf is the template for drilling the holes in the mirror cover. Again, why anyone wants this is beyond me, but here it is. Easier on me, easier on all.

This is the kit I ordered from Japan and installed exactly 7 years ago:



The above OEM kit will work on the Coupe, Convertible, or Sedan. Keep in mind I have a Coupe, with mirrors from a 'Vert (power folding) along with the OEM "auto-fold" module (separate topic).

The car IS NOT "pre-wired" for this accessory. You will have to run wiring from the BCM, through both doors, to the mirrors. You are responsible for doing your own research and for any work you do to your car. While none of this is rocket science, if you don't know what you're doing- especially with electronics- keep your fish hooks in the tackle box.

Also, there ARE SOME WIRING DIFFERENCES between ALL global variants of the G37/ Skyline 370GT (EUC, GCC, JDM, USDM, etc.). It is on you to verify the correct circuit paths before splicing/ tapping.

 

thanks for posting up the information.

I had mine installed during my accident repairs at the shop. Have the folding mirror and the winker on my sedan and love it.