Fico's Build
04-18-2013, 10:10 AM
#1
Fico's Build
Car: 2010 G37X Coupe....
Name: Yael
Story:
Bought her brand new as my daily driver with the intentionsnot to mod it.... As you can see I failed
. I have a civic that I知 currentlybuilding as my "race car" but keeping anything stock for me is hard. I知trying to limit what i do to the engine to keep her reliable so I致e focusedmainly on exterior bits.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com
fficeffice" /><o
></o>
Whats on it now:
IPL Front Bumper
IPL Side Skirts
Vis Racing Carbon Fiber Hood
Vis Racing Carbon Fiber Trunk
BC coil overs
Avant Guard M510 19x8 +35 1/4" spacers
Hanook V12 255/40/19
EBC Green Stuff Pads
Carbon Fiber Roof Wing
Carbon Fiber Rear Diffuser
35% Tint
Takada Intake
OBX Cat Back Exhaust (Arc Style)
UpRev Tuner
Grounding Wires
M370 Intake Manifold
Baseline Dyno (mods installed) 265/220 to the wheels
Tuned 276/225 to the wheels
Dyno done on 5/16/13 by Smokeys Dyno
Plans from here:
Carbon Fiber wrap for the roof
ill find more, there is always more to do....lol
Intake Install:
Engine Bay:
Exhaust:
Exterior:
[IMG]
http://i27.photobucket.com/albums/c181/vibratingcow/boobie/Infiniti/IMG_20130402_125653-1.jpg[/IMG]
Name: Yael
Story:
Bought her brand new as my daily driver with the intentionsnot to mod it.... As you can see I failed
. I have a civic that I知 currentlybuilding as my "race car" but keeping anything stock for me is hard. I知trying to limit what i do to the engine to keep her reliable so I致e focusedmainly on exterior bits.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-comfficeffice" /><o></o>Whats on it now:
IPL Front Bumper
IPL Side Skirts
Vis Racing Carbon Fiber Hood
Vis Racing Carbon Fiber Trunk
BC coil overs
Avant Guard M510 19x8 +35 1/4" spacers
Hanook V12 255/40/19
EBC Green Stuff Pads
Carbon Fiber Roof Wing
Carbon Fiber Rear Diffuser
35% Tint
Takada Intake
OBX Cat Back Exhaust (Arc Style)
UpRev Tuner
Grounding Wires
M370 Intake Manifold
Baseline Dyno (mods installed) 265/220 to the wheels
Tuned 276/225 to the wheels
Dyno done on 5/16/13 by Smokeys Dyno
Plans from here:
Carbon Fiber wrap for the roof
ill find more, there is always more to do....lol
Intake Install:
Engine Bay:
Exhaust:
Exterior:
[IMG]
http://i27.photobucket.com/albums/c181/vibratingcow/boobie/Infiniti/IMG_20130402_125653-1.jpg[/IMG]
Last edited by Fico; 05-16-2013 at 11:40 AM. Reason: updated information
04-18-2013, 01:02 PM
#5
Registered User
I would paint the hood the same color as the car, not digging the two tone. That would also make the vents a little more subtle.
04-18-2013, 08:07 PM
#7
i really want a set of advan sa3r's but the streets around home and work are terrible so i buy rims i can easily replace lol
ha ha thank you, trunk and intake manifold are in the mail i have the wrap for the rood but i dont know what im going to do about then antenna...
thank you!
i was going to but it saved paying anything out of pocket after my accident
im looking into some now thinking maybe 15mm and roll the front fenders. thank you
ha ha thank you, trunk and intake manifold are in the mail i have the wrap for the rood but i dont know what im going to do about then antenna...
thank you!
im looking into some now thinking maybe 15mm and roll the front fenders. thank you
Trending Topics
04-19-2013, 09:51 AM
#10
Thank you, ive been wanting to do something similar forever, finnaly pulled the trigger.
ha ha thanks jp! i might have to come down and roll my fenders this weekend....all depends on the weather
Side note:
Intake manifold should be here monday (w00t)
Trunk should be here any time before May
Still need to find a better way to get the roof wing to stick....
ha ha thanks jp! i might have to come down and roll my fenders this weekend....all depends on the weather
Side note:
Intake manifold should be here monday (w00t)
Trunk should be here any time before May
Still need to find a better way to get the roof wing to stick....
04-20-2013, 12:44 PM
#11
15mm spacers don't make much of a difference. I have the 19' sport wheels, and am running 20mm up front and 25mm in the rear, lowered. No rubbing issues. I'd go with that, I tried 15mm up front at first and was confused. I thought I didn't even install them when I looked back. lol
04-21-2013, 01:39 PM
#13
15mm spacers don't make much of a difference. I have the 19' sport wheels, and am running 20mm up front and 25mm in the rear, lowered. No rubbing issues. I'd go with that, I tried 15mm up front at first and was confused. I thought I didn't even install them when I looked back. lol
intake will be here monday wish i had it today to mess around with but oh well. my rims are 35 offset so i loose 7mm there thats why i was thinking 15mm spacers would work
