Zydan's Mod Log
Thread Starter
Registered Member
Joined: Jul 2009
Posts: 614
Likes: 17
Got a chance yesterday to get some rolling shots in, link below.
Also arriving next week Stillen Gen 3 and cusco strut bar, more to follow.
https://www.myg37.com/forums/picture...apis-blue.html
Also arriving next week Stillen Gen 3 and cusco strut bar, more to follow.
https://www.myg37.com/forums/picture...apis-blue.html
Thread Starter
Registered Member
Joined: Jul 2009
Posts: 614
Likes: 17
Intake and Strut Install
Sorry for the late update~ I ended up installing this myself with quite a bit of help and tips from Diego which I very much appreciate.
I was going to have the local shop do it, but they couldn't get me in for like a week, and I'm too impatient for that.
What probably is a 2 hour our job for most took me like 6 hours, but saved me a couple hundred and learned a lot in the process.
Also after everything was installed I was noticing some vibration when idling, after closer inspection drives side tube was touching the body of the car rubbing, so had to put some silicon on between there as well
All in all was a fun project, sounds great, and feels good!
Stock Intakes Off
Bumper Off
Holes Enlarged
New Intakes going on
AC Lines Wrapped
And Ta Da!
And a final picture of the car for no reason
I was going to have the local shop do it, but they couldn't get me in for like a week, and I'm too impatient for that.
What probably is a 2 hour our job for most took me like 6 hours, but saved me a couple hundred and learned a lot in the process.
Also after everything was installed I was noticing some vibration when idling, after closer inspection drives side tube was touching the body of the car rubbing, so had to put some silicon on between there as well
All in all was a fun project, sounds great, and feels good!
Stock Intakes Off
Bumper Off
Holes Enlarged
New Intakes going on
AC Lines Wrapped
And Ta Da!
And a final picture of the car for no reason
Last edited by Zydan; Mar 10, 2015 at 10:16 PM.
Thread Starter
Registered Member
Joined: Jul 2009
Posts: 614
Likes: 17
Ark Photo Contest
Feel free to invite others and share this as well 
My friend Sarah and I have both entered two different categories in a contest, if you could click each link and hit vote and would be greatly appreciated. If you already voted then just ignore this!
Click Links and Click vote - Simple Simple
https://woobox.com/8ga2v2/upload/232629
and
https://woobox.com/jcgdjt/upload/240905
Thanks Everyone!
My friend Sarah and I have both entered two different categories in a contest, if you could click each link and hit vote and would be greatly appreciated. If you already voted then just ignore this!
Click Links and Click vote - Simple Simple
https://woobox.com/8ga2v2/upload/232629
and
https://woobox.com/jcgdjt/upload/240905
Thanks Everyone!
Thread Starter
Registered Member
Joined: Jul 2009
Posts: 614
Likes: 17
More good advice
Thank you thank you... Sell most likely, maybe my wife will be lucky and I'll put them on her Lexus lol
Thread Starter
Registered Member
Joined: Jul 2009
Posts: 614
Likes: 17
Sorry for the late update~ I ended up installing this myself with quite a bit of help and tips from Diego which I very much appreciate.
I was going to have the local shop do it, but they couldn't get me in for like a week, and I'm too impatient for that.
What probably is a 2 hour our job for most took me like 6 hours, but saved me a couple hundred and learned a lot in the process.
Also after everything was installed I was noticing some vibration when idling, after closer inspection drives side tube was touching the body of the car rubbing, so had to put some silicon on between there as well
All in all was a fun project, sounds great, and feels good!
Stock Intakes Off
Bumper Off
Holes Enlarged
New Intakes going on
AC Lines Wrapped
And Ta Da!
And a final picture of the car for no reason
I was going to have the local shop do it, but they couldn't get me in for like a week, and I'm too impatient for that.
What probably is a 2 hour our job for most took me like 6 hours, but saved me a couple hundred and learned a lot in the process.
Also after everything was installed I was noticing some vibration when idling, after closer inspection drives side tube was touching the body of the car rubbing, so had to put some silicon on between there as well
All in all was a fun project, sounds great, and feels good!
Stock Intakes Off
Bumper Off
Holes Enlarged
New Intakes going on
AC Lines Wrapped
And Ta Da!
And a final picture of the car for no reason
Any updates for me Deigo? LOL!DOMO
Thread Starter
Registered Member
Joined: Jul 2009
Posts: 614
Likes: 17