Brakes, Suspension, Wheels & Tires
Rollers and Rubbers (View All Posts)

cling, clong, clank - coil over noises

Thread Tools
 
Search this Thread
 
Old Feb 21, 2017 | 08:44 AM
  #1  
steven92's Avatar
steven92
Thread Starter
Registered User
 
Joined: Sep 2015
Posts: 513
Likes: 32
From: SoCal
cling, clong, clank - coil over noises

Posting for a friend


My friend has a 2012 G37X Sedan. He recently installed BC coilovers and Hotchkis front and rear sway bars with stock bushings. Recently from 0-30 mph the rear end has been making clanking sounds. Suggestions on what this is and how to fix it?
Reply
Old Feb 21, 2017 | 09:46 AM
  #2  
manny-g37x's Avatar
manny-g37x
Registered User
 
Joined: Mar 2016
Posts: 8
Likes: 4
Thank you Steve. It's a clanking noise on the driver side rear every time I drive between 0-30 mph.. at high speeds I don't hear anything and cars pretty smooth overall. I can't figure out if it's sway bars that may be loose or if its the coilover??? Anyone??
Reply
Old Feb 21, 2017 | 01:33 PM
  #3  
terribleone's Avatar
terribleone
Registered Member
 
Joined: Feb 2010
Posts: 392
Likes: 31
From: Madison, WI
Depending on how low you are, you can hit the sway bar on the camber arm. http://i60.tinypic.com/23ww783.jpg
Reply
Old Feb 21, 2017 | 04:34 PM
  #4  
Surfnazi's Avatar
Surfnazi
Registered Member
 
Joined: Nov 2013
Posts: 2,109
Likes: 176
Does it clunk over speed bumps if so it's the sway bar endlinks
Reply
Old Feb 21, 2017 | 04:35 PM
  #5  
Surfnazi's Avatar
Surfnazi
Registered Member
 
Joined: Nov 2013
Posts: 2,109
Likes: 176
Also make sure the endlinks aren't loose where they bolt onto the car
Reply
Old Feb 21, 2017 | 04:45 PM
  #6  
manny-g37x's Avatar
manny-g37x
Registered User
 
Joined: Mar 2016
Posts: 8
Likes: 4
The SPL sway bar end links I got did not fit my car. It wasn't designed for the AWD version according to my guy who installed the coilovers. He said it would just get in the way. So I shipped them back to Z1 motorsports. So do you think its still the same issue?
Reply
Old Feb 21, 2017 | 08:28 PM
  #7  
HoldmyMouse's Avatar
HoldmyMouse
Registered User
 
Joined: Jul 2012
Posts: 971
Likes: 131
So for suspension mods, you only have Hotchkis (stock bushings) and BC coils?

Two few things I want to point out...
1) The oversized Hotchkis would not fit in the stock bushings. They should come with their own bushings with grease port. Check out the picture here HOTCHKIS SPORT SUSPENSION SYSTEMS, PARTS, AND COMPLETE BOLT-IN PACKAGES » Blog Archive 2008+ Infinity G35X G37X (AWD) Sport Sway Bar Set from Hotchkis Sport Suspension

2) Common problem with BC is loose top nut. I would suggest a bit of loctite and run the top nut down with an impact. Did you get the coils used? If yes, check for play in the dampers. If no, contact BC and seek for support.
Reply




All times are GMT -4. The time now is 12:30 AM.