stance sc5 alignment question
stance sc5 alignment question
I put 20x10 stance sc5 20x30x275 rear and 20x30x245 in the front. I have Megan Coilover street LP. I dropped it a good amount so that the rear wheels were just slightly tucked in the fender. The guy at the alignment shop said i would have to raise it a good amount to get the alignment right because the offset will have the tires out past the fender and if I hit a hard bump it would jam the tire into the fender and buckle it... He said a camber kit would not fix this.
My question is for those who have lowered. Is there anyway I can get my car aligned but still keep the look I want and/or keep the tire tucked into the fender.?


My question is for those who have lowered. Is there anyway I can get my car aligned but still keep the look I want and/or keep the tire tucked into the fender.?


With those tires you'll have to run negative camber so the wheels will be tucked in under the rear fender....I am on 20x10 +35 with 285/30/20 and with -2.1 camber....The camber kit will help set the camber at the best position to your liking since it has a play of +- 4
Thread
Thread Starter
Forum
Replies
Last Post




