Looking to purchase and install Eibach Springs
lol... take your time bro... I know what you mean...
I walk into work this morning and its about 38... Ill walk out at 3:45 and it will be 68 degrees... I look forward to takin a stroll in the G today...and then come home and look at your PHAT pics... lol
I walk into work this morning and its about 38... Ill walk out at 3:45 and it will be 68 degrees... I look forward to takin a stroll in the G today...and then come home and look at your PHAT pics... lol
Joined: Oct 2007
Posts: 2,335
Likes: 1
From: Metro Detroit, MI [Sterling Hts.]
eibach pro kit made special for the G37 is way i am going to go...i did not wanna jump the gun on the g35 springs with our heavier car and have it settle lower and ride differently. i wanna do it properly and as fine tuned as possible. 1.2in up front and .8 drop in the back look and sound good to me. im gonna keep my stock 19s on it for a year too! with this subtle drop does anyone expect increased risk for driveway curb problems, speed bumps bottoming out, etc.?
check out these performance oriented gains from the acclaimed pro-kit
http://eibach.com/cgi-bin/start.exe/...try=y&thid=122
does it all look pretty legit? im guessing on a performance coupe like our G - the margins of gains such as with 0-60, mpg, etc. will all be more narrower margins.
check out these performance oriented gains from the acclaimed pro-kit
http://eibach.com/cgi-bin/start.exe/...try=y&thid=122
does it all look pretty legit? im guessing on a performance coupe like our G - the margins of gains such as with 0-60, mpg, etc. will all be more narrower margins.
Last edited by DetroitG37Joe; Mar 11, 2008 at 03:32 PM.
Joined: Oct 2007
Posts: 2,335
Likes: 1
From: Metro Detroit, MI [Sterling Hts.]
anyone get the eibach springs on the g37 Sport? pics??? Also it says on stillens site that a camber kit is necessary for proper alignment...
found a good deal for eibach's pro kit here at advanced speed shop for $221.40 + $17.89 for s/h
http://www.advancespeedshop.com/eiba...40-p-3971.html
anyone have experience with that store?
Also - if i want a very subtle drop primarily to just eliminate some fender gap but maintain the ride - do u guys think i should go even more conservative and go for the Tanabe Sustec NF210? http://www.tanabe-usa.com/springs/nf210.asp
Or what about that versus the Tein High Techs which are the competitor springs made for luxury vehicles to eliminate fender gap?
http://www.tein.com/products/high_tech.html
So I guess given my needs - the debate is between Eibach Pro-Kit vs Tein H-tech vs Tanabe NF210
***of course the Tein H-tech is not out yet. Will require a wait.
found a good deal for eibach's pro kit here at advanced speed shop for $221.40 + $17.89 for s/h
http://www.advancespeedshop.com/eiba...40-p-3971.html
anyone have experience with that store?
Also - if i want a very subtle drop primarily to just eliminate some fender gap but maintain the ride - do u guys think i should go even more conservative and go for the Tanabe Sustec NF210? http://www.tanabe-usa.com/springs/nf210.asp
Or what about that versus the Tein High Techs which are the competitor springs made for luxury vehicles to eliminate fender gap?
http://www.tein.com/products/high_tech.html
So I guess given my needs - the debate is between Eibach Pro-Kit vs Tein H-tech vs Tanabe NF210
***of course the Tein H-tech is not out yet. Will require a wait.
Last edited by DetroitG37Joe; Mar 11, 2008 at 08:07 PM.
Detroit; I am on the same page. I would like minimal drop up front, don't mind the back much. I appreciate the ride
I think I read here that somebody only droped the fronts, wonder how it went?? Anybody knows?
Are the Eibachs the way to go for minimal drop from all springs available today?
I think I read here that somebody only droped the fronts, wonder how it went?? Anybody knows?
Are the Eibachs the way to go for minimal drop from all springs available today?
I didnt want to start a new thread for this but I read on another thread where some chick dropped her g37 with the H&r springs and couldn't get her camber back into spec with the built in correction that our cars have.
So anyone know of what camber kits are out for the G37? I'm putting on the eibach pro kits when they come out at the end of the month and I want to get It back to factory specs. Extending tire wear is my goal.
So anyone know of what camber kits are out for the G37? I'm putting on the eibach pro kits when they come out at the end of the month and I want to get It back to factory specs. Extending tire wear is my goal.
I didnt want to start a new thread for this but I read on another thread where some chick dropped her g37 with the H&r springs and couldn't get her camber back into spec with the built in correction that our cars have.
So anyone know of what camber kits are out for the G37? I'm putting on the eibach pro kits when they come out at the end of the month and I want to get It back to factory specs. Extending tire wear is my goal.
So anyone know of what camber kits are out for the G37? I'm putting on the eibach pro kits when they come out at the end of the month and I want to get It back to factory specs. Extending tire wear is my goal.
Sorry for these questions but I never had to learn this stuff before because tires were so cheap.
And any front camber kits in the works that you know about?
^^Sorry but I cannot answer your questions on what is need since I am a noob at the whole lowering thing and camber kits. I am working with SPC to get some front camber kits made but I am still waiting to hear from them. The techs looked at my car and are now going to their marketing department to see if there is a need for the part.
Joined: Oct 2007
Posts: 2,335
Likes: 1
From: Metro Detroit, MI [Sterling Hts.]
Detroit; I am on the same page. I would like minimal drop up front, don't mind the back much. I appreciate the ride
I think I read here that somebody only droped the fronts, wonder how it went?? Anybody knows?
Are the Eibachs the way to go for minimal drop from all springs available today?
I think I read here that somebody only droped the fronts, wonder how it went?? Anybody knows?
Are the Eibachs the way to go for minimal drop from all springs available today?
Eibach Pro Kit, Tein High-Tech, and Tanabe NF210
^^^^^Those 3 springs all specialize in subtle, conservative and tasteful drops. lowering some center of gravity, eliminating at least half the fender gap up front and a tad in the back, lowering nose dive when stoppin and improving cornering etc, all while not increasing spring rate more than about 5% to maintain close to OEM ride and therefore probably minimizing the overall wear on the vehicle's OEM suspension. Also I assume that a subtle drop would have a better chance of getting the car's alignment back into spec without issues.
Also the more subtle the drop the less tire tread wear is increased (assuming an alignment is done)
I believe the Tanabe is the most subtle of the drop of the 2 listed with just an inch up front and .7 in the back. I might choose those springs just for that. The Eibach and Tein H-Techs are pretty similar - about 1.2 inch for the whole car at both ends.
Most of these spring companys do NOT recommend installing half a set and just putting springs up front.
What do you think you may go for?
Joined: Oct 2007
Posts: 2,335
Likes: 1
From: Metro Detroit, MI [Sterling Hts.]
^^Sorry but I cannot answer your questions on what is need since I am a noob at the whole lowering thing and camber kits. I am working with SPC to get some front camber kits made but I am still waiting to hear from them. The techs looked at my car and are now going to their marketing department to see if there is a need for the part.
Last edited by DetroitG37Joe; Mar 12, 2008 at 11:27 AM.
Joined: Oct 2007
Posts: 2,335
Likes: 1
From: Metro Detroit, MI [Sterling Hts.]
Im under the same dilemma. I like the name and renowned reputation eibach has - but I like the most subtle drop which Tanabe's NF210 offers. What's the deal breaker???



