Not yet but as you know i was the first person with the G37s in South fl. So thats why i got these wheels..i'll keep you guys post it.

 

so, you got wheels that are made for the g37? with the correct offset and everything? what if i went with 20 8.5/10 with the offset of +40, will they fit without any modification? 245/35/20f and 275/30/20r, any rubbing?

 

they should fit, but will still be sunken in some..

mine are 20x8.5 & 20x10 +30 and the rears probably could of been 3 or 4 millimeters more aggressive

 

so, what spacers should i get to make them flush?

 

so, i get a 10mm spacer in the front with +40, which will make it +30 and +40 in the rear and it will sit flush and fit?

 

I would throw a spacer on the rear too if you are going with +40. From what I understand, the front brake is the real problem. The +40 will not clear it. That's why the spacer is needed. I would say +40 with a 10mm spacer all around and you are pretty money, unless you're a baller and can convince them to sell you the +30.

 

looks great

 

now all u have to do is debadge and your car would look so sickkk

 

OK, its time for some facts. I ha ve never posted so this is my first. I just spoke to Sevas who happens to be 15 minutes away from me here in Miami. Apparently, they don't make any wheels for the G37 "yet". They have told me that production will begin end of this year.

They have also told me that you can fit the S-7 model wheel (same as the one in this persons' pics) only with spacers and they don't recommend it due to vibration. They have also told me that they have tried reaching this person and have been unable to, with no response. They want to know what he did to mount them.

No flamming, just facts.

Sevas
305-971-6517