Quick Question re: lowering/spacers
Quick Question re: lowering/spacers
Apologies if this has been discussed before but I am in the process of buying tires for newly acquired wheels.
These are the rims I have (19" oems)
http://www.socalwheels.com/content/p...s/IMG_0151.JPG
I am lowering on swifts and looking to avoid having to use spacers..(will use if necessary but if not needed then even better)
The wheels are a square set up for my G37xS sedan.
Question: If I want to achieve the flush look, would I need spacers with these wheels?
If no, share your experience!
These are the rims I have (19" oems)
http://www.socalwheels.com/content/p...s/IMG_0151.JPG
I am lowering on swifts and looking to avoid having to use spacers..(will use if necessary but if not needed then even better)
The wheels are a square set up for my G37xS sedan.
Question: If I want to achieve the flush look, would I need spacers with these wheels?
If no, share your experience!
Last edited by zonnie; Nov 29, 2016 at 01:22 PM.
I'm not sure actually whether they are all fronts or rears... how do i find this out? the old fashion way of measuring?
btw I just checked out your IG I love your spoiler! what kind is it?
btw I just checked out your IG I love your spoiler! what kind is it?
Trending Topics
http://www.ebay.com/itm/181931148162
There are others sold by a few different sellers but they are all pretty much the same product. Most people said that the fitment was great. Mine was pretty good overall, except for the trunk button and camera. The holes were horribly cut. The chrome piece stays on the trunk, otherwise the surface is not flush enough for the spoiler to go on.
There are others sold by a few different sellers but they are all pretty much the same product. Most people said that the fitment was great. Mine was pretty good overall, except for the trunk button and camera. The holes were horribly cut. The chrome piece stays on the trunk, otherwise the surface is not flush enough for the spoiler to go on.
You don't have to paint your chrome piece. I just left it as is. The camera view is not obstructed so that didn't bother me too much. The trunk hole, however, is very small and doesn't really even line up with the button. I can barely even get to it.






