MyG37

Notices

For anyone riding low...

   
Old Oct 7, 2016 | 11:12 AM
Share
  #1  
xmajd92's Avatar
xmajd92
Thread Starter
Registered Member
iTrader: (1)
 
Joined: Feb 2015
Posts: 551
Likes: 35
From: Houston, TX
For anyone riding low...
For the guys who are riding low to the ground. Are you running without the inner fender liners? No rubbing issues over bumps and stuff?
Reply
0
Old Oct 7, 2016 | 11:18 AM
Share
  #2  
beng37s's Avatar
beng37s
Registered User
iTrader: (1)
 
Joined: Jul 2015
Posts: 331
Likes: 31
From: PA
I'm riding relatively low with wide wheels and fat tires, I rarely rub and when I do it is very minor. Haven't had to touch the fender liners or bumper brackets
Reply
0
Old Oct 7, 2016 | 11:29 AM
Share
  #3  
Kris9884's Avatar
Kris9884
Registered Member
iTrader: (3)
 
Joined: Feb 2016
Posts: 2,073
Likes: 202
From: MO
Haven't modded a single thing in the fenders and there's plenty of space. I could use a 5mm spacer all around though.
Reply
0
Old Oct 7, 2016 | 11:32 AM
Share
  #4  
xmajd92's Avatar
xmajd92
Thread Starter
Registered Member
iTrader: (1)
 
Joined: Feb 2015
Posts: 551
Likes: 35
From: Houston, TX
Roads in Houston must be that bad then. I've already replaced my fender liners twice
Reply
0
Old Oct 7, 2016 | 05:14 PM
Share
  #5  
2011-G's Avatar
2011-G
Registered Member
 
Joined: Aug 2016
Posts: 413
Likes: 41
From: Houston, Texas
Originally Posted by xmajd92
Roads in Houston must be that bad then. I've already replaced my fender liners twice
+1

Especially if you travel towards south west Houston
Reply
0
Old Oct 7, 2016 | 08:27 PM
Share
  #6  
blnewt's Avatar
blnewt
Movin On!
iTrader: (13)
 
Joined: Nov 2009
Posts: 24,876
Likes: 4,950
Originally Posted by xmajd92
Roads in Houston must be that bad then. I've already replaced my fender liners twice
How low are you (from the ground to the fender arcs)? If you're under 25.75" that's probably going to cause some issues.
Reply
0
Old Oct 7, 2016 | 08:51 PM
Share
  #7  
xmajd92's Avatar
xmajd92
Thread Starter
Registered Member
iTrader: (1)
 
Joined: Feb 2015
Posts: 551
Likes: 35
From: Houston, TX
Originally Posted by blnewt
How low are you (from the ground to the fender arcs)? If you're under 25.75" that's probably going to cause some issues.
Not sure. Never measured it. But here's a pic.

For anyone riding low...-photo328.jpg
Last edited by xmajd92; Oct 7, 2016 at 09:01 PM.
Reply
0

Trending Topics

Old Oct 7, 2016 | 11:37 PM
Share
  #8  
blnewt's Avatar
blnewt
Movin On!
iTrader: (13)
 
Joined: Nov 2009
Posts: 24,876
Likes: 4,950
Originally Posted by xmajd92
Not sure. Never measured it. But here's a pic.

Attachment 124266
Looks about zero gap, similar to my sedan drop, should be around 26.25". Pretty reasonable for daily driving, and our roads suck too
Reply
0
Old Oct 9, 2016 | 02:32 AM
Share
  #9  
evil-G-nius's Avatar
evil-G-nius
Registered Member
iTrader: (1)
 
Joined: Aug 2013
Posts: 2,266
Likes: 396
From: Santa Rosa, CA
I am at stock height and certain bumps I am hitting my fender liner in the rear. Curious to know how that is gonna be when I drop the car! LoL. Is there any reason NOT to run a fender liner?
Reply
0
Old Oct 9, 2016 | 10:00 AM
Share
  #10  
xmajd92's Avatar
xmajd92
Thread Starter
Registered Member
iTrader: (1)
 
Joined: Feb 2015
Posts: 551
Likes: 35
From: Houston, TX
Originally Posted by evil-G-nius
I am at stock height and certain bumps I am hitting my fender liner in the rear. Curious to know how that is gonna be when I drop the car! LoL. Is there any reason NOT to run a fender liner?
I wonder how that's possible lol.
Reply
0
Old Oct 10, 2016 | 12:09 AM
Share
  #11  
Matty_baby's Avatar
Matty_baby
Registered User
 
Joined: Feb 2016
Posts: 44
Likes: 7
I'm tucking with 10 in fronts & 11.5 in rears. I had to take my front fender liner (the back piece) out because it caught onto my wheel & got destroyed lol. Other than that, it's all gravy.

Reply
0
Old Oct 10, 2016 | 01:16 AM
Share
  #12  
evil-G-nius's Avatar
evil-G-nius
Registered Member
iTrader: (1)
 
Joined: Aug 2013
Posts: 2,266
Likes: 396
From: Santa Rosa, CA
I dont get how you have 11.5 in the rear and its not sticking out at all. I have 10.5 all the way around and they poke a little
Reply
0
Old Oct 10, 2016 | 01:19 AM
Share
  #13  
Matty_baby's Avatar
Matty_baby
Registered User
 
Joined: Feb 2016
Posts: 44
Likes: 7
Originally Posted by evil-G-nius
I dont get how you have 11.5 in the rear and its not sticking out at all. I have 10.5 all the way around and they poke a little
High offset my friend. I'm running 20mm spacers in rear to clear the coilovers
Reply
0
Old Oct 10, 2016 | 11:42 AM
Share
  #14  
evil-G-nius's Avatar
evil-G-nius
Registered Member
iTrader: (1)
 
Joined: Aug 2013
Posts: 2,266
Likes: 396
From: Santa Rosa, CA
What offset you running? I am a +22 square
Reply
0
Old Oct 10, 2016 | 11:49 AM
Share
  #15  
Matty_baby's Avatar
Matty_baby
Registered User
 
Joined: Feb 2016
Posts: 44
Likes: 7
Originally Posted by evil-G-nius
What offset you running? I am a +22 square
+55 with a 20mm spaced so +35 & they're flush. +22 is definitely going to stick out a bit
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 10:25 AM.