2003-2005 350Z OEm springs on a 2008 G35 sedan

Thread Tools
 
Search this Thread
 
Old Aug 9, 2019 | 10:38 AM
  #16  
puddin''s Avatar
puddin'
Registered Member
 
Joined: Aug 2019
Posts: 4
Likes: 0
From: St.Louis / Alton
RESURRECTING FROM THE DEAD!!

I am planning on doing this to my 2008 G35X. I already have some 370z rear springs. They have 2 green 1 pink dot on them. Do you think those will work nicely? I think they should be a little stiffer, and a little lower. My question is should i look for 2003-04 350z front springs? or should i look for 370z front springs. I am going to swap the springs onto new AWD struts.

Last edited by puddin'; Aug 9, 2019 at 10:39 AM. Reason: all in bold
Reply
Old Aug 9, 2019 | 01:21 PM
  #17  
slartibartfast's Avatar
slartibartfast
Super Moderator
10 Year Member
Liked
Loved
Community Favorite
iTrader: (7)
 
Joined: Oct 2014
Posts: 6,105
Likes: 842
From: Houston, Tx
Not stiffer unless they came from a NISMO. The Z is lighter so that a G rear spring is the same or stiffer that the Z part.
Reply
Old Aug 9, 2019 | 01:28 PM
  #18  
puddin''s Avatar
puddin'
Registered Member
 
Joined: Aug 2019
Posts: 4
Likes: 0
From: St.Louis / Alton
oh cool. then the 370z rear springs i have should work nicely. Thanks. Do you think i should look for 350 or 370z front springs?
Reply
Old Aug 10, 2019 | 12:06 AM
  #19  
slartibartfast's Avatar
slartibartfast
Super Moderator
10 Year Member
Liked
Loved
Community Favorite
iTrader: (7)
 
Joined: Oct 2014
Posts: 6,105
Likes: 842
From: Houston, Tx
Whichever is the heavier car.
Reply
Old May 31, 2021 | 11:40 AM
  #20  
Dankhaamar007's Avatar
Dankhaamar007
Registered User
 
Joined: May 2021
Posts: 1
Likes: 0
Thank you so much for posting this, I'm currently in an 07x sedan, I am assuming the added weight of the x sedan is sprung mass so it should drop a little lower, I paid 50$ and wasn't sure if they'd fit, someone said they do not but they never tried. Love how it turned out on your car, putting mine on soon
Reply




All times are GMT -4. The time now is 02:27 AM.