Suspension suggestions G37x sedan
Suspension suggestions G37x sedan
Guys just put some Vossen CV3's on the car (20x9 245/30 front, 20x10.5 285/30 rear) and my bc coilovers have arrived. Is there anything else i should look into? Is there front and rear camber parts that fit the X?? Should i also put some Hotchkins sways on?
SPC Front and Rear Combo INFINITI G37 2008 - 2011 72260 + 72130
CV-3s are nice but 285 is pretty wide for the sedan. I am planning to go with 275 on a 19x10 within a couple weeks.
I think the following should work:
SPC Front and Rear Combo INFINITI G37 2008 - 2011 72260 + 72130
CV-3s are nice but 285 is pretty wide for the sedan. I am planning to go with 275 on a 19x10 within a couple weeks.
SPC Front and Rear Combo INFINITI G37 2008 - 2011 72260 + 72130
CV-3s are nice but 285 is pretty wide for the sedan. I am planning to go with 275 on a 19x10 within a couple weeks.
Thanks for the link. Yeah i thouth so too but Diego at Vossen recommended the sizes and i figured he definitely knows what hes talking about.
I bought these wheels. They are going on in a couple weeks when the tires arrive.
I bought 275/30/20 for the rear but the prior owner had 285's on them.
It really depends on the wheel design and offset.
Lowering and creating a bit of negative camber (with 0 toe) will tuck them for you as well.
Pic with the 285's on 20" DPE r16
I bought 275/30/20 for the rear but the prior owner had 285's on them.
It really depends on the wheel design and offset.
Lowering and creating a bit of negative camber (with 0 toe) will tuck them for you as well.
Pic with the 285's on 20" DPE r16
Vossen cv3 on the X
and vossen tells me that the 20x10.5 won't fit.
Trending Topics
10.5s fit perfectly fine! Go staggered 9.0 and 10.5 w 245/35 and 275 or 285s with +45 rear. Contact me with any questions, you will be within the 3% rolling diameter so no worries absolutely no worries affecting the AWD system on the X.
Vossen cv3 on g37x sedan
I just did a test fit today with the vossen cv3 20x10.5 in the rear. It doesn't fit, it sticks out an inch. So, I guess I'm just gonna wait till the 20x10 arrives. Hopefully, at least it will be flush with the fender.
What offset? sounds like you placed the +25 offset, you need the +45 rear 10.5s!
Vossen Wheels come with two Offsets!
32/45 - Recommended for Sedans
20/25 - Aggressive on coupes and not recommended for sedans for those exact reasons the +25 stick out way to much.
Check behind the wheel to see what the offset is. All sedans with +32/45 DO NOT stick out.
Vossen Wheels come with two Offsets!
32/45 - Recommended for Sedans
20/25 - Aggressive on coupes and not recommended for sedans for those exact reasons the +25 stick out way to much.
Check behind the wheel to see what the offset is. All sedans with +32/45 DO NOT stick out.




