SPC Front Camber Kit G37 Coupe SEMA Pre-release

From our THM Forum:
http://www.thmotorsports.net/forums/...=newthread&f=6

TO GET IN ON THE FIRST 10:
https://www.myg37.com/forums/supporting-vendors/187153-spc-front-camber-kit-pre-release-buy-in-this-is-what-you-all-have-been-waiting-for.html

 

Yaaaaaaaaaaaaaaaaaaaaaaaa!!!!!!!!!!!!

 

I don't have a password... When are they supposed to be available?

 

omg... this fits all g37 coupes im guessing?

 

Yep since the 4WAS is on the back of the car. The fronts on the G37s are suppose to be the same between 4WAS and non-4WAS.

 

yep, fits all coupes and 07-09 Sedans!

 

http://www.thmotorsports.net/forums/showthread.php?t=69

 

https://www.myg37.com/forums/showthread.php?t=187153

POST 1 or this link to get in on the buy in!!!

 

Sorry, but why would a car need this?

 

to correct camber after lowering the car.

or to increase camber for track use

 

Hey gang,
I'm the mechanical designer for the SPC G35/ G37 UCA's. I just joined the forum and wanted to chime in with a photo of the actual UCA. I should have better pics later in the week.

We are trying to push thru a pre-production order for the G37 arms. We know how anxious you are to get them. Don't have a firm delivery date yet so don't hold me to it.

For future reference the SPC G35 P/N is 72130 and the G37 P/N is 72135.

Also our 72260 rear camber arm and toe bolt kit will fit the 2008 G37.

Any questions you can email me direct at jpagani@specprod.com.
Jeff

 

does any one is aware that this SPC camber (front Arms) is hitting inside the fender when you run in to smal bumb? I called SPC already and waiting for their response.

 

Yes. we already have a full discussion about this, and I have been in contact with SPC over the last week and a half. see this thread.

 

I've also talked to SPC about this issue. They are aware of it, we're waiting on an official response.

 

Ok good news!!. Dough from SPC Performance advice and sent me set of silicon washers to add to your factory bump stopper. I put 3 washers on each front shocks and took care of my issue of the SPC upper arm hitting under the fender. so far so good.i will keep you update if there will be anymore issues. thanks