When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
These would be very easy to replace just remember they use your main bulb from your car headlights other than that you need nothing. I think you’ll really enjoy these, they look great and perform very well. Good luck.
I had mine installed about 2 weeks ago, I am so happy they make me feel like my car is new again.
The only issue I have with them is that the light projects into a weird shape, I see it on trees and overpasses, the lights seem to aim up very high even after adjusting them.
Ok so will these be able to help me with my repair ? The lights on the headlights work but the wires got removed from my crash.... the wire to the turn signal is still attacted so that works.... can I have the bulbs taken out and put these in ? I’m fixing the bumper soon so I want to have a good headlight replacement . Do I need any extra housing or assembly ?
I ordered mine during their pre-order event, and they do look great.
The output compared to stock is not great, and the cut-off with the dual projectors are a little off. I've attached some images of the cut-off below..
I did end up emailing them to see if my cut-off was normal, but they never replied.
I'm guessing these are euro spec. Some years ago i got some euro spec headlights for my Volvo and they were the same way. The cut-off line is higher on the passenger side than the drivers side.
U.S. headlights used to be that way, and I thought they still are. When did that change?
Not talking about the way they are aimed. I'm referring to the beams of the headlines not going straight across. If you look at the pic you'll see they curve upwards on the passenger side.
