Hello!

I have searched everywhere for a DIY of our cars with pictures, but came out empty. It doesn't help that the forums on kp technologies website is non functional as well.

I am wondering if someone could help with this install. Note: describe it with a how to "dummies" instructions.

Yes, there is a install guide that came with it, but I need it in more layman's term.

2012 sedan

Thanks!
na1ddo

 

I was curious about this module and read the instructions.

Unless you are good with a voltmeter/oscilloscope and routing wire from the instrument panel to the fog light relay, this is not an easy install.
If you don't have experience with this, I would hire someone who has done this before. The risk of a single mistake could be VERY expensive.

Generally is best to stay away from "Universal" anything, as you have to make it fit.

 

Thanks for the advice SonicVQ!

I'm still hoping someone with a successful install, and step by step instructions will come along (unlikely!).

I reside in Houston, TX if anyone is familiar with this module and would like to help install. I will pay you for your endeavors.

Thanks.

 

This may help... It is for a M35/M45 and I would think the G35/G37 would be similar:
KP Technologies Fog Light Controller - Nissan Forum | Nissan Forums

 

Subbed. The module looks awesome, and I'd love to get it, but the install scares me. I've also looked for a good non-electrical-engineer DIY, but came up empty.

 

Not trying to change the subject but I was also wanting to get the KP Module but I had a hid headlight harness laying around from a previous car and decided to use that instead of messing with the factory wiring and installed a switch into the blank spot below the trunk/sonar/traction switches, and wired a relay in with it so it turns off/on with the car. I figured that would be much easier. To each their own but for me it paid off. As long as you don't mind a non functional OEM fog switch its an easy solution.