I installed my R2C intake last night on our 2013 g37xs and now the windows won't raise with 1 touch. Lowering is fine but the button had to be held to fully raise the windows. Is there a setting for this? Thanks!

 

I think you need to reset the button. Once the window is up, hold the lever UP for 10 seconds or so.

 

Check it out

 

This should be stickied as it is asked at least once a week.

And of course, the whole procedure is detailed in the Owner's Manual, but since no one EVER reads it, I will summarize a simple method which always works here:

1) Roll the window down all the way and continue to hold the switch for at least 10 seconds after it is all the way down.
2) Roll the window all the way up and continue to hold the the switch for at least 10 seconds after it is all the way up.
3) Enjoy your freshly reset one-touch operation.

 

Thank you that worked perfectly. I honestly read my entire owners manual but do not recall coming across those instructions.

 

The manual, on or about page 2-52, and under the heading "If the windows do not close automatically", says to hold the 'up' button for a mere 3 seconds, but I have not found that this method always works, so I prefer memorizing the one that does.