buGfresh

iTrader: (1)

There are parts involved, I do all the detailed wiring, so you all can plug in the 3 wires per side and ground the unit and have it work.
I even build a resistor in so you don't get hyper flash.
Parts in the kit if you want to know :
4 relays, 8 diodes, 1 resistor, 7 wires, 8 butt splice connectors, 1 ground ring terminal, and the box it goes in.
what I am charging for is parts, labor, and shipping
Hope this helps

99 black gt

i don't suppose youd post a schematic? lol, though, i guess it's probably not all that complicated of a circuit to create

Mik3G37S

iTrader: (8)

Can you guys post a picture of the location where you installed the black box because I'm gonna have it done tomorrow

sniper27

iTrader: (2)

just tuck it between the left side of the spare tire and the trunk liner. make sure you put it low enough so you can put the spare tire kit back down. I used some 3M tape to hold it in place so it doesn't rattle around.

Mik3G37S

iTrader: (8)

okay awesome thanks for help !

Damn Dirty Ape

iTrader: (16)

This involves cutting wires, correct?

dotmichael

Hey Andy, I've emailed a couple times but I thought i'd post on the forums saying itd be a huuuuuuuuuge help if you could post an install video.

I lease and am modding it but am petrified of cutting something on the car even if I can hide it later it still makes me just a bit uneasy and I know I cant be the only one.

Some good quality videos and youre gonna have more business than time.

buGfresh

iTrader: (1)

I completely understand, and its on the to do list. I've been really busy, and out of the country for the last few Weeks. I will get it done asap in order to help everyone out further!
Thanks guys!

buGfresh

iTrader: (1)

Yes, two wires per side

Mik3G37S

iTrader: (8)

I finally got it done with my brother's help and I am very pleased with the outcome! Definitely love it!

carz

great work!

InfiG37xS

PM me the info please

duffdaddy

iTrader: (1)

I was one of the first people to have this installed at BuGfreshs house. My car is on page 3 post 38, g37 coupe. I did ask for him not to help and was able to install this mod in less than 30 minutes. Took me a second to understand the wiring diagram but after that was very easy to install. Put the box down by the spare tire as there was plenty of wire to work with. I know maybe no one else notices the difference, But I know, and I know it looks a lot better this way. Cheap mod that is very satisfying. Highly recommended!!!

GPR-37s

iTrader: (3)

Email sent!

buGfresh

iTrader: (1)

email me for more information andyrushing@rushingautoi.com