When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
.....and clear coat. I think maybe on the next set I'll get Igor to paint the front part of the housing around the turn signal but not all of it; maybe a strip about 1"-1.5" back from the leading edge.
I like that idea. It is still a little too silver for me around the turn signal. Also, did you paint or tint the amber?
That'll teach you folks to demand more pics instantly from me! I can go out and take about 500 more and post them full size and crash the servers if you like.
They aren't the best photos, but you can get an idea of what they look like on the car.
Bruin, I painted the grille myself in the garage using regular spray cans. DupliColor primer, universal balck (it said it matched KH3 and it does), and clear coat. I think maybe on the next set I'll get Igor to paint the front part of the housing around the turn signal but not all of it; maybe a strip about 1"-1.5" back from the leading edge.
Oh and I see some curb rash on that front wheel. Whats up with that? Is that your doing or did you let the little lady drive?
That's what happens when you do all you can to avoid a drunken idiot and have to hit the curb to avoid serious damage to your car. Kind of a sore subject.
Originally Posted by hamdavid
I like that idea. It is still a little too silver for me around the turn signal. Also, did you paint or tint the amber?
It is painted BO like the rest of the inside of the headlight housing.
Front part of the housing around the turn signal but not all of it? Hmmm, having trouble visualizing.
There's a clear plastic piece that's inside the part of the housing where the turn signal is. It is about an inch or so deep and has a bar that runs from top to bottom inside the housing. Black along the bottom edge of that piece and up the sides. Also the small triangular part at the uppermost point of the headlight just above the turn signal bulb.
There's a clear plastic piece that's inside the part of the housing where the turn signal is. It is about an inch or so deep and has a bar that runs from top to bottom inside the housing. Black along the bottom edge of that piece and up the sides. Also the small triangular part at the uppermost point of the headlight just above the turn signal bulb.
Be sure to post pics of that when you get it done. BTW, your large format pics looked great on my 30" monitor.
Betty that's exactly what i wanted to do except i wanted iron man. Any way you could take a picture further from the car so i can see how aggressive it looks from a far.
Betty that's exactly what i wanted to do except i wanted iron man. Any way you could take a picture further from the car so i can see how aggressive it looks from a far.
I'll try to get one later today if possible, after I get my grille put back together. X-vert is your man - he does excellent work; and I'm very picky. He should become a vendor here, then maybe he'd answer his PM's quicker.
looks great!, but ton's of rock chips already? dont you have the clear bra?
You can easily see the clear bra on the entire front end. Clear bra gets rock chips too as you can see. A hazard of actually driving your car a lot instead of having a garage queen. 35K in the first year will give you lots of opportunities to get rock chips. I got one on my newly painted grille today and it's only been on for 2 days!
