Hey guys, so I had my battery disconnected while I was working on the lights and when I plugged everything back up and connected the battery, the parking lines were off and my wheels were originally turned to the left when I was working on it. So when my wheels are straight, according to the parking lines its says my wheels are turned. This is so annoying and I've tried disconnecting the battery with my wheels straight to see if that reset the alignment but it still didn't work. I don't know if it's because I didn't have it disconnected from the battery long enough or somethings wrong. Please help!

 

There is a rather easy calibration procedure to adjust the lines. The attached snap shot is from the FSM for my '08. Might want to check the AV section for your year just to be sure.

Attachment 115355

Hope this helps.

 

Thanks but I just figured it out. I made sure the wheels were straight and then I disconnected the battery for like 15 minutes and then reconnected the battery and it was fine.