I am interested in the Modded GT-R Button. Does anyone know where I can buy one.

Thanks

Gabe

 

PM OnlyNismo.

 

Now I'm curious, I have the GTR button...whats this about a modded one?

 

When you press it while driving, it activates super speed mode.

 

LoL.

It's modded because the lights on the button can be personalized to whatever you want. Most people are going with a red/amber/green setup and white button lights. Only a few people mod them.

I'm waiting on a reply from OnlyNismo so that I can get my hands on one too.

 

What kind of LEDs are used for the modification of the GTR button

 

Just saw his thread on DieselDoug's custom gtr button. Glad to see he's local to me. I pmed him as well to see if he can do it for my button. I'll check to see if he's willing to let me know the part num's for the leds.

 

tried PMing him for the part numbers and haven't gotten a response yet (Been a day or two). If you find out please let me know.

 

I was able to find out the types of LEDs used in the button. I ordered the LEDs and the button. I plan on doing the mod myself. Cant be that hard

 

And the part numbers or sizes?

 

The mod requires you to desolder the existing SMD LEDs and then solder new ones on. If you planning on doing this yourself, make sure you have good knowledge with soldering, and also make sure you have a solder sucker.

As for the SMDs, I'm sure they are 0603 SMDs but I can't be certain.

 

I'd recommend just having OnlyNismo do it. He's confident and solid at his work. Mine is with him now and I was referred by many members here as well. DieselDoug hasn't been to the site in a loooong time.

 

If you have worked with soldering before you should have enough skills to DIY, but i do warn you, there is a chance you can mess up. If you never worked with SMDs don't jump in on the button's circuit on your first try, if you break the circuit or melt a chip you need another button. The SMD LEDs itself are easily melted if not careful. Here are the LEDs i used, (they aren't exact size but they work) For the center LED HERE and 3 for the lettering HERE (use these links as a reference, you need to find the color you need.)


Reference sizes:

Center LED :
Package: 0805
Size: 2 mm x 1.2 mm x 1.1 mm

Lettering LED:
Package: PLCC-2
Size: 3 mm x 2.8 mm x 1.75 mm

 

I do have skills in soldering. That is the only reason why I plan on doing it myself.

inspector94- you are correct with the LEDs. You need 2- 0805. One for the Center and the other to light up the Engine Letters.

You need 3- PLCC-2 LEDs for the top lettering on the button

 

Are you sure about the engine letters? i think the middle LED lights that up. I didn't use a GTR button as i didn't like the red button so im basing this off what i have seen.

In this image you can see that both the boards are the same with no second 0805 LED. (Blue is G37 and Brown is GTR). Else i question why there is a middle LED when the GTR has a solid center button.