I was ready to install the NAV by pass KP NI35 but ran into issue that the instructions are poor plus the connector in vert has 2 grey, purple wires..
I completed the black and red wire solder on the OK PWB but now I am stuck - help please,,,,

Do I have the correct connectors or ....?

Any one of you have done this mod might have the answer- here are few shots





Thanks

 

Go read the forum rules. You can't talk about this on here. There are other forums that allow it, but not here. get ready for this thread to be closed

IBLT!!!!

 

and why's that ?

is this not a forum for g-Vert,

help me with the forum rules?

 

dude, you are tripping! He's doing the nav bypass. How is that against the forum rules.

 

OP, check you pm. Sending you a link and I hope it'll help.

 

Yes thanks sedan and convertible connectors with number of wires is different..

connector in vert has 2 grey, 2 purple wires..

I'll have to do my week end study on ESM wiring. Thanks but

 

Haha **** my bad OP. you're right Wei...I'll blame it on long flights all week. I made a noob mistake and thought it was the movie hack. My bad

 

OK,now give me a solution to my query if you have one or take a nap .. even KPT is stumped too... and going in circles....

 

someone did this on the vert, it's in the KPT thread I think about the nav bypass.

 

Use the purple/grey wire on the left of picture

Use the grey one closest to the purple/grey wire

This is how i installed mine in my vert.

 

Thanks a lot, I knew some one will have answer....

 

Smurf -
Did you get this worked out? I am in San Fran on business and won't be home until Monday But i can consult my notes then if needed. I installed this over a year ago with no issues.

Please let me know if you need help.

 

B

Do you have Tech and Sports package in your car? if not then the connector would not have 2 gray and 2 purple wires that's what threw a curve (lost whole so. calif lovely day). I contacted KP and he did not know either so I decided to consult myG37 brain trust and g37vanbc answered my question and I translated into photo.


... Thanks a bunch.
PS: KPT instructions are poor at best - felt like as if these were written in China and not USA.

Thanks

 

Yes, my car is fully loaded including tech & sport packages.
The really funny part is that I installed the first nav module in a vert & I gave Kevin (KP Tech) feedback regarding the details. As it turned out, the wiring is identical to the coupe. Looking at the photo, I do recall the issue you describe but I also had the wiring diagram from the service manual and used the actual #s of each wire to determine to correct connections.

Glad it all worked out for you (finally). Take care!

 

Thanks for your help B, issues resolved - KPT wasn't of much help!