I am getting pairs of Alpine SWR-1043D Type-R 10" sub-woofer.
Specifications are;

* frequency response: 24-500 Hz
* power handling: 300-600 watts RMS (300 watts per coil)
* peak power: 1,800 watts


Now the amp's I have in choice within my price range that can HOPEFULLY get the job done would be;

Power Acoustik BAMF1600/4 1600W Max, 4-Channel Class Amplifier
Specifications are;

• 1600W Max 4-Channel BAMF Series Class AB Amplifier
• RMS Power Rating:
  • 4 ohms: 150 watts x 4 chan.
  • 2 ohms: 180 watts x 4 chan.
  • Bridged, 4 ohms: 360 watts x 2 chan.
• Max power output: 1600 watts

Crunch P1-5000.5 1300W MAX, 5-CHANNEL POWER ONE Series AMPLIFIER
Specifications are;

• Power One Series 4-Channel Class A/B Car Amplifier
• MAX Power Rating:
  • 4 ohms: 62.5 watts x 4 chan. + 150 x 1 chan.
  • 2 ohms: 125 watts x 4 chan. + 250 x 1 chan.
  • Bridged, 4 ohms: 250 watts x 2 chan.
• MAX Power Rating (14.4V):
  • 4 ohms: 125 watts x 4 chan. + 300 x 1 chan.
  • 2 ohms: 250 watts x 4 chan. + 500 x 1 chan.
  Bridged, 4 ohms: 500 watts x 2 chan.

Which one would you prefer getting? I am leaning on the Power Acoustik.

Thanks

 

Both These amps won't be enough power for the sub. If you wana bridge it to your speakers get a multichannel amp, if not the Alpine pdx.600 and 1000 mono amps are very good. You need at least a 600 watt amp for your 4ohm sub and neither of these put out that much to 4 ohms.

 

Are you really looking for that much bass? You should come listen to my system, it sounds like 2 subs in the 4080 box

and theres a guy selling a 4080 with a 10w6 in the classifieds for a great price.

 

How much do you wanna spend? From there, I'll make some suggestions.

EDIT: Don't buy a 4 channel amp. For two subs, go with a mono class D amp. Multi channel amps are for component speakers, 2 channel amps can be used for subs, but aren't as efficient as mono class D amp.

Power Acoustik and Crunch = junk. Don't waste your $

 

Oh WTF I didn't c that you has 2 subs, I think the alpine pdx.1000 would be your best best it's a really good amp. But that is a lot of base lol I got one fosgate 12 p3 in my car that **** bumps

 

Im actually getting 1 Type R alpine sub and im getting this alpine amp that my friend recommends... So no more 2 subs for me. I need trunk space.

 

Less than $400 for an amp.

I was thinking getting 1 sub of a Type R and use this amp..

Alpine - 500W Class D Mono MOSFET Amplifier with Adjustable Crossover - MRP-M500

 

You need a 1-ohm or 4-ohm stable amp if you want to just run a single amp.
You need two 2-ohm stable amps if you want to run two amps.

For $400, you're going to be pushing it. You can use two of those amps you posted above. Don't buy from Best Buy tho'. Put "Alpine MRP-M500" into Google Shopping, and you can get that amp for $130.

or...

Go with two Alpine MRP-M1000 amps for $250 each. Either way, you're looking at some $ if you want those subs to really get off. Type R's can be a little power hungry.

 

I'd go with some US Amp if you have the money, get a mono block amp from them. Ive own one for 3 years and it push a lot of thing I threw at it and it's still going.

 

I'm getting the Alpine MRP-500 & Alpine 10" Type R next week, they hit and sound very very clean. Friends hooking it up