D.I.Y. Installations/Modifications Do It Yourself guides and information for the G37. Stickies approved by Administrators and Moderators.

DIY: How to remove scratches from Infiniti G37s shifter

Thread Tools
 
Search this Thread
 
Old 08-30-2014, 08:12 PM
  #1  
origommi
Registered User
Thread Starter
 
origommi's Avatar
 
Join Date: Jun 2014
Posts: 13
Received 1 Like on 1 Post
How to remove scratches from Infiniti G37s shifter

Below is a step by step walk-through on how I removed the scratches from 2008 Infiniti 37S.

Step 1: Remove the shifter ****. Pull down the silver bezel ring until it and the leather boot slide down. You should see the retainer clip at the bottom of the shifter ****.

Step 2: Remove the retainer clip. Use a pair of pliers and pull the retainer clip straight out.

Step 3: Get painters tape and a bag of course and fine steel wool (I got mine from Lowes).

Step 4: Tape off the leather area around the chrome with the painters tape.

Step 5: Use the course steel wool and LIGHTLY sand with the grain. Once all of the clear coat is gone use the fine steel wool the same way.

Step 6: Put back on the shifter ****. Slide **** back on shifter and replace the retaining pin. DONE!!

I am not saying to do this, its just what I did.... I am not responsible for any damage you do to your car.
Attached Thumbnails How to remove scratches from Infiniti G37s shifter-1.jpg   How to remove scratches from Infiniti G37s shifter-2.jpg   How to remove scratches from Infiniti G37s shifter-3.jpg  
The following users liked this post:
BH818 (09-10-2014)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
superjoey
D.I.Y. Installations/Modifications
31
03-22-2023 11:56 PM
BANNISTER
Private Classifieds
24
12-10-2015 04:14 PM
joeposter
G's FS
1
09-08-2015 04:36 PM
cellwoot
G37 Coupe
13
08-13-2015 04:27 PM



Quick Reply: DIY: How to remove scratches from Infiniti G37s shifter



All times are GMT -4. The time now is 07:31 PM.