![]() |
Vossen CV1's on G37x ??? Help!
Love the Vossen CV1's - want to put them on my G37x. Has anyone done this yet? Will be getting the Eibach PK for the X put on in 2 weeks..
Do you get to select the offset you want or is there a standard for all CV1's? What offset will work best with the eibach g37x springs? Can I add spacers? The shop I got the quote at suggested 245/35/20 and 275/30/20 Toyo Proxes T1-S tires.. Will this work? My understanding is that with the awd, rotating diameter has to be within 3% or so... So do I need to go 30/30 or can I go 35/30? Would appreciate any help/insight!! |
withing 5%, as long at its withing 5% your good, you can have your tires as wide as you like
|
can you all stagger with awd?
|
There are no 30/30 nor 35/30 offsets on CV1. Vossen only offers 32/45 (I believe) and 20/25. I think you will have to go with 32/45 your tires can be 245 front 285 rear. Hope it helps
|
Is it possible to run 20/25 offset on a G37x?
Thanks |
Originally Posted by BooSa37
(Post 3101446)
There are no 30/30 nor 35/30 offsets on CV1. Vossen only offers 32/45 (I believe) and 20/25. I think you will have to go with 32/45 your tires can be 245 front 285 rear. Hope it helps
id like to know the answer to this too |
If it's tire, you can either do 30/30 (I'm running that with my cv1) or 30/35
|
So off topic, can you run a staggard set up with an awd ?? I just remeber someone having trouble with it in the past.
|
i think as long as the overall rolling diameter is within 5% your ok
i just did a quick calculation and i think a 30/35 setup on a 20 wheel is +- 1.7% ish |
hmmmm... gotcha.
|
id like it if someone could confirm the 5% rule though lol
|
3% is the rule. check any tire websit as well as ask most tire stores. However 5% is ok I run 5% off on my FX.
|
Originally Posted by BooSa37
(Post 3101446)
There are no 30/30 nor 35/30 offsets on CV1. Vossen only offers 32/45 (I believe) and 20/25. I think you will have to go with 32/45 your tires can be 245 front 285 rear. Hope it helps
|
TPMS = Tire Pressure Monitor Sensor
|
Seems like most questions were already answered. Let me know if there is anything else I can do for you. Thanks guys!
|
| All times are GMT -4. The time now is 06:47 AM. |
© 2026 MH Sub I, LLC dba Internet Brands