S-tech + Vossen 20's
 

I ordered everything last week, and I am just waiting for those to come in.
I ordered:

-Tein S-tech
-SPC Rear Camber kit
-Vossen VVS083's Black Machined Chrome SS Lip
20x9 +32
20x10.5 +39

Except the tires.
I think I am going for hankook but I just wanted to make sure the tire size I am getting would work on my setting. (S-tech scares me lol)

Hankook V12
245/35/20
285/30/20

Would this work without rubbing after springs fully settles?


One more quesiton.

I bought wheels pretty cheap from local dealer. I already ordered them but does Vossen provide Lugnuts in the boxes that wheels come in?
or is it something that I have to separately order?
I know vendors here include lugnuts but is it different story if I buy from the local dealer? I never mentioned it b/c I forgot and didn't know.

Vossen does not provide lug nuts! But excellent set-up! Those tire sizes will
be just fine!!!! Keep us posted , can't wait to c it.

There won't be any rubbing with the S-Techs.

The rims do not come with lugs unless the local dealer decided to include them.

My wheels did not come with lugs

i got 082's and mine did ????

I got robbed then lol.

I can just buy any set of lugnuts then?

I have 255 on the back with 10.5 with +30 offset with -1.8 degree of camber and I barely have any room, how does 285 with a +39 not rub? He's going to have to run alot more camber than I would right?

I have REAR SPC CAMBER KIT
and are going to put those toes in spec (close to OEM)
then I would rub?

any comment on this setting?
Would it work or rub?

any pics?

I have +30 and run a 275 no rubbing ad spc rear camber arms , lowered on S-techs !!!! hankook 285 I did rub with same drop and spc!!! Do Not run - camber just trim liner and bracket and you good to go! With a + 39 and hankooks 285 yes you will slightly rub cause of tire not offset or drop, I never rubbed with falken 285s but me and Steve rubbed with hankook 285!!!! And Steve went from 305 to 285 then rubbed!!! How did that happen? Well hankook has a bulkier azz tire.

If I want to keep my tire size as it is 285/30/20,
I should go with Falkens and not hankooks?
I know hankook is better than Falken but don't want to risk anything with rubbing.
I want no rubbing at all.. :(
Falken 285? or Hankook 285? : (

Deigo.
After you changed to hankook 285, you had to shave the bracket right?
then after you shaved it, how was it with rubbing? g

With 285 and +39 rear offset it did not rub anymore after alignment and the bracket slightly shaved!!! After I switched to +30 rear offset rubes even more and finally shved as much as possible and now everything is perfect...So w hankook you will have to slightly shave or trim liner/bracket so maybe falken would be more practical or hankook 275/30/20... To avoid shaving or triming and rubbing with the +39