Mark this thread as Unsold
FS GKTech rear subframe solid bushings
GKTech rear subframe solid bushings
Category: Steering & Suspension
Price: $130
Private or Vendor Listing: Private Listing
Part fits: 2010+ G37 Coupe, 2010+ G37 Sedan, 2008-2009 G37 Coupe, 2008-2009 G37 Sedan
Location (State/Prov): OR
Item Condition: Brand New
$145 shipped CONUS
Last edited by digital.aaron; Jan 21, 2025 at 11:29 AM. Reason: price drop
I went with the collars and what a huge difference in feel on how the car connects to the road.
Just be aware of a few things, the NVH will go up, you may notice that the diff can whine a bit at around 60mph (at least mine does and it checks out good) and the collars will creak where they rub against the frame washers.
I added a very thin sheet of foam between the top of the collar and the frame washer to help keep things quiet. -note that if you decide to go with the foam, you will have peroidically check the torque on the bushing bolts.-
Good luck with selling!
Just be aware of a few things, the NVH will go up, you may notice that the diff can whine a bit at around 60mph (at least mine does and it checks out good) and the collars will creak where they rub against the frame washers.
I added a very thin sheet of foam between the top of the collar and the frame washer to help keep things quiet. -note that if you decide to go with the foam, you will have peroidically check the torque on the bushing bolts.-
Good luck with selling!
Heh, I already have a full heim joint suspension. NVH was disregarded long ago. I originally thought I'd get a spare subframe and do the full solid bushings, but I haven't found any donor cars around me. Plenty of G35s, though.y
Thread
Thread Starter
Forum
Replies
Last Post
b2autodesigns
Drivetrain
259
Mar 29, 2018 11:55 AM
4DRZ
Engine, Drivetrain & Forced-Induction
12
Mar 12, 2017 10:48 PM







