Mark this thread as Unsold
FS STILLEN Infiniti G37 Q60 Generation 3 Ultra Long Tube Dual Intake
#1
STILLEN Infiniti G37 Q60 Generation 3 Ultra Long Tube Dual Intake
Category: Engine - Intake/Fuel
Price: $400
Private or Vendor Listing: Private Listing
Part fits: 2010+ G37 Coupe, 2010+ G37 Sedan, 2008-2009 G37 Coupe, 2008-2009 G37 Sedan
Location (State/Prov): IL
Item Condition: Used
Infiniti G37 Q60 High Flow Cold Air Intake Kit
STILLEN was the first national performance tuner to introduce a high flow cold air intake for the Infiniti VQ37 equipped cars. Our first cold air high flow air intake system offered a small gain in power accompanied by great sound enhancement. Economical and easily installed, this Gen 1 Cold Air Intake gained instant popularity.
Not long after, we introduced our Gen 2 Long Tube Intake. It improved on the Gen 1 unit with polished tubes, even better sound and a bump in power. It also quickly became one of our best-selling air intake kits.
At STILLEN, good is never good enough. Our continuing dedication to extracting maximum performance from the VQ37 powerplant led to the introduction of our new Generation 3 Ultra Long Tube Cold Air Intake Kit for the 370Z. Our R&D team engineered and dyno tested more than 50 variations before identifying this design as the best solution available for the VQ37 engine.
The Gen 3 intake has a radically updated design that provides dramatically better power than any intake on the market for the VQ37 equipped vehicles. The new Ultra Long Tube Cold Air Intake places two large air filters in front of the radiator. This strategic placement of the filters allow for optimum cold air flow and easy filter access and removal for cleaning. On some applications such as the G37 a urethane splash guard is included in the kit to help protect the filter.
It features an integrated system of variable diameter tubing and steps to maximize air velocity, including additional polished tubes that pass through the front core support.
The power result: A dyno-proven 18.5 wheel horsepower on the G37 coupe and 14 wheel horsepower on the sedans. This translates to an estimated 20-22 horsepower gain at the flywheel. No other cold air intake for the VQ can match these power gains.
Recommended installation requires removal of the front fascia clip (not absolutely necessary for some vehicles, but significantly aids in ease of installation) and slightly enlarging the holes through the front core support.
Fits both the 2008-13 G37 & 2014 Q60
14-18.4 rear wheel horsepower gain
Ultra-long mandrel bent polished aluminum intake
Genuine K & N air filters included
Easy to follow step by step installation instructions
Signature STILLEN sound - aggressive but refined engine note without the headache inducing drone
Installation requires mild enlargement of core support
50 State Legal - CARB Exempt - E.O. #D-436-21