When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Nice! Need some side shots of your ride height. Looks low. Must be a blast to be RWD and have the Blizzaks!
I'm sitting stock right now, must be the angle of the shot. Definitely considering lowering once the summer wheels (370z rays) go back on. Here's a side shot from a few days ago.
I'm sitting stock right now, must be the angle of the shot. Definitely considering lowering once the summer wheels (370z rays) go back on. Here's a side shot from a few days ago.
I have the vinyl sitting in my "mancave" and won't even open the box. At 1st it was too cold, not I'm just scared I'll do a crappy job. Plus I haven't seen a Smoky Quartz sedan with the trim wrapped...
I have the vinyl sitting in my "mancave" and won't even open the box. At 1st it was too cold, not I'm just scared I'll do a crappy job. Plus I haven't seen a Smoky Quartz sedan with the trim wrapped...
hahaha the fear of screwing it up is partly why i havent ordered but it also saves you about $300 so gotta learn sometime
hahaha the fear of screwing it up is partly why i havent ordered but it also saves you about $300 so gotta learn sometime
Start with the simple stuff so you can figure it out. The belt-line trim is one straight, single piece. You might even stop there, for fear that you couldn't wrap the rest of it to 100% satisfaction.
I did mine not knowing what to expect. It was much easier than I thought it would be. The DIY write up was a HUGE help in knowing the cut sizes and how to apply the vinyl. Get a good application tool, sharp knife, and heat gun. You'll surprise yourself when you realize how easy it is.
With this DIY, it's completely reversible, unlike some others. If you mess up the cost of the vinyl isn't much either if you want to do it again. Give it a shot, you'll be surprised and Blnewt's done all of the work of figuring out how to cut the vinyl to shape.