Full Screen Headunit Replacement (For Android / Raspberry Pi Setup)
 

This is accompanying the project write-up I posted here: https://www.myg37.com/forums/audio-v...riod-auto.html

WARNING: This is an advanced project and should not be installed if you don't know what you are doing. I take ZERO responsibility if you screw up your car.
This is setup for 2007-2009 cars with BOSE and TECH. It can work on others but you may need to change some wiring. Check this on your own. It will NOT work on 2010+ TECH CARS.

For sale is the fully custom display setup I designed and built for my G before I sold it. This allows you to replace the display with a high resolution / high brightness LED display giving an HDMI input while retaining the factory system and backup camera.

This setup consists of the following:
- 3D Printed Housing, direct drop in
- Daylight readable 1280x800 LCD Touch Screen
- Weiya CV-04 (Used for converting stock display output for the new screen)
- Touchscreen converter
- Modified OEM LCD driver board
- Remote LCD board with 3D printed ash tray mount
- Modified VIM harness (used to not cut into any factory wiring)

You must add the Pi and software setup but this is all the accompanying hardware you will need.

$300 shipped.



https://cimg7.ibsrv.net/gimg/www.myg...f0a420e6ff.jpg
https://cimg9.ibsrv.net/gimg/www.myg...d76ec620f7.jpg
https://cimg6.ibsrv.net/gimg/www.myg...5faea10d1d.jpg
https://cimg0.ibsrv.net/gimg/www.myg...959583b9bc.jpg
https://cimg1.ibsrv.net/gimg/www.myg...ba6b792cf8.jpg

Bump. If it does not sell soon I will just take it apart and repurpose.

bumpity bump

bumpity bump

bumpity bump

This is really a neat addition to the car, is it still available? I am sadly selling my G37s :'( OTherwise I would jump on this

Yes still have it. will probably take it apart and reuse the parts if it does not sell.