|
Originally Posted by Synolimit
(Post 3776572)
To much for what I got. Got screwed from quote to actual.
|
The last one is the dyno from yesterday? It shows a 16hp gain? I wonder if you need to extend the rev limiter now. Not sure what stock internal can hold but I'm sure you can add a few hundred.
|
Originally Posted by dtea54
(Post 3823560)
Your build is sick man are you planning jn making a functional rear diffuser and installing a wing for downforce ?
Originally Posted by nishfish871
(Post 3823593)
The last one is the dyno from yesterday? It shows a 16hp gain? I wonder if you need to extend the rev limiter now. Not sure what stock internal can hold but I'm sure you can add a few hundred.
|
370z 50-100mph tread. Everyone post. - Nissan 370Z Forum
So my dyno and 1/4 mile all suck but at least I have some power to prove from all this!! This tells me my dyno reads low and my tires suck for the strip. I'm getting 6.5 seconds on the vid and that's with my tires chirping in 2nd. I figure that's a good tenth or two right there if i can get them hotter. This is ZL1 and C63 AMG territory so woohoo for only 302rwhp. synolimit, 2013, Nissan, 370z, 3200*, 3.7, 6 Cyl, All Motor, NA, 93, 302, 244, 14.0, 105.5, 6.5 |
I had seen you on the370z forum, but didn't know you were a member here. Im going to have to try that 50-100.
Originally Posted by Synolimit
(Post 3793241)
Ps I'm selling all my OEM stuff unported so someone here can buy it, send it out for porting and install on their car so it's not down for a week or two.
|
Originally Posted by alfredo24pr
(Post 3830725)
I had seen you on the370z forum, but didn't know you were a member here. Im going to have to try that 50-100.
What parts do you have unported? |
Originally Posted by alfredo24pr
(Post 3830725)
What parts do you have unported? |
added the upper intake manifold back into the FS thread!!
soon to have bench flow testing done! https://www.myg37.com/forums/private...le-bodies.html |
I'm slowly liking these mods... LIM & TB...
I got a stock UIM if u want to buy port and flip... |
Originally Posted by PongSanity
(Post 3837598)
I'm slowly liking these mods... LIM & TB...
I got a stock UIM if u want to buy port and flip... |
Throttle Body Results
1 Attachment(s)
RESULTS! I will recommend these!
Dyno: Dynojet Dyno video: Dyno graph: AT BOTTOM Car: 08' G37s 6MT The Throttle Bodies were the last mod that I have done. Prior to the new throttle bodies my numbers: 304.87 HP 256.86 TQ STD Mods: Motordyne Art Pipes, Motordyne E370 Shockwave Cat-Back Exhaust, Motordyne Intake Manifold, Stillen Gen3 Intakes, Uprev Tune. Numbers after the new TB's and retune: 317.92 HP 269.98 TQ SAE Mods: Motordyne Art Pipes, Motordyne E370 Shockwave Cat-Back Exhaust, Motordyne Intake Manifold, Stillen Gen3 Intakes, Uprev Tune, 63mm ported TB's. |
EEEEEExcellent!
|
Beautiful. Might look into this mod now.
OneSickBlackG: how long did the retune take? |
So if I buy 63 mm throttle bodies should I keep my Takeda intakes that I believe are 2.75 or put my stillens back on that are 2.50??
|
Originally Posted by alfredo24pr
(Post 3840112)
Beautiful. Might look into this mod now.
|
| All times are GMT -4. The time now is 02:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands