MyG37

MyG37 (https://www.myg37.com/forums/)
-   Engine, Drivetrain & Forced-Induction (https://www.myg37.com/forums/engine-drivetrain-and-forced-induction-309/)
-   -   anyone put 6mt 3.69 gears in 7at (https://www.myg37.com/forums/engine-drivetrain-and-forced-induction/259205-anyone-put-6mt-3-69-gears-in-7at.html)

kdawg8526 06-17-2014 02:10 PM

anyone put 6mt 3.69 gears in 7at
 
hi all i have a automatic vlsd sedan. seen buncha people puttin 4.10 gears into there 7at. i dont want to go too aggressive so i was wondering if i could put just the g37 6mt differential into my auto its about 3.69 gear ratio. found some used going for about 500 bucks on ebay.

any thoughts about this?

NJ Torque 06-17-2014 03:11 PM

Methinks that the yoke is different 6MT to 7AT

kdawg8526 06-17-2014 08:18 PM

you talking about the flange from the differential to shaft?

chuckie311 06-17-2014 08:46 PM

yep they are different but very easy to swap out..

kdawg8526 06-17-2014 09:35 PM

do i have to buy a driveshaft from a manual and take off the flange?

Solidus 06-18-2014 10:15 AM

I'm doing the same thing soon and from what I found here and the z sites I just need the 6mt driveshaft rear half. I'm also going with the whiteline bushings. I've been holding out on the "buy it now" button because I was looking for the "Unicorn" 6mt "vert" sport pumpkin withe the 3.9 fd. Probably ain't happening good luck with yours.

NJ Torque 06-18-2014 10:43 AM


Originally Posted by Solidus (Post 3791781)
I'm doing the same thing soon and from what I found here and the z sites I just need the 6mt driveshaft rear half. I'm also going with the whiteline bushings. I've been holding out on the "buy it now" button because I was looking for the "Unicorn" 6mt "vert" sport pumpkin withe the 3.9 fd. Probably ain't happening good luck with yours.


The verts never came with VLSD.

Solidus 06-18-2014 11:37 AM


Originally Posted by NJ Torque (Post 3791801)
The verts never came with VLSD.

That makes the fact I gave up hope comforting. I can always swap in a 4.08 fd if I'm not happy with the 3.69 fd. Thanks for that info.

NJ Torque 06-20-2014 04:49 PM


Originally Posted by Solidus (Post 3791818)
That makes the fact I gave up hope comforting. I can always swap in a 4.08 fd if I'm not happy with the 3.69 fd. Thanks for that info.


...Ask me how I know, haha.

I am going to do the 6MT rear diff into my G sedan and see how I like it...

Solidus 06-21-2014 01:05 PM


Originally Posted by NJ Torque (Post 3792701)
...Ask me how I know, haha.

I am going to do the 6MT rear diff into my G sedan and see how I like it...

Are you going to leave it alone or go 4.08/3.9 ? I'm still contemplating having gears installed.

NJ Torque 06-21-2014 02:42 PM


Originally Posted by Solidus (Post 3792919)
Are you going to leave it alone or go 4.08/3.9 ? I'm still contemplating having gears installed.


I am going to install it as the 3.69 for now, and see how that does.

dgey1 06-22-2014 05:38 AM

I've purchased a 6 sd mt vlsd 3.692 pumpkin and will be installing it as soon as I have time. swapping out the yoke for my pumpkin should be easy. poly bushings going in too. will update when this happens. anyone know if the speedo needs to be recalibrated? :dunno:

Solidus 06-22-2014 01:47 PM

Don't know for sure but I don't think so . I'm probably a month out from install because I'll be out of country for a couple weeks. Question is are we all reporting back to this thread or will a new one be made to combine our experiences?

dgey1 06-22-2014 03:02 PM

should I remember, I'll post to this thread, but at the least, I'll make a thread to report

kdawg8526 06-23-2014 12:20 AM

sounds good loooking forward to ur guys experience. i found a ipl differential it shouldnt be any different than regular G right


All times are GMT -4. The time now is 05:28 AM.


© 2024 MH Sub I, LLC dba Internet Brands